Porsche 911 991 / 991.2 Prepreg Dry Carbon Fiber / CRFP GT2 RS Body Kit

Engineered for Porsche 911 991/991.2 owners chasing the 991.2 GT2 RS aero language, this Prepreg (Dry) Carbon Fiber / CRFP GT2 RS Body Kit transforms your 911 with a wide, race-grade carbon package. Manufactured in Europe to factory-spec tolerances and quality-controlled by BYC Performance, this Porsche 911 GT2 RS carbon body kit mounts directly to OEM chassis points.

The 991.2 GT2 RS (2018) — 700 hp from a 3.8L twin-turbo flat-6 — was the most powerful 911 of its era, with wide fenders, aggressive splitter, massive wing, and vented hood as its motorsport signatures. This CRFP GT2 RS Body Kit brings that visual language to 991/991.2 Coupé owners. Some panels use standard prepreg 2x2 twill carbon; large structural pieces use CRFP (chopped randomly forged plastic / forged carbon), combining classic 2x2 weave with the marbled, fragmented look of forged carbon.

Key Features

• Prepreg + CRFP Carbon Combination: Surface panels in prepreg 2x2 twill, structural pieces in CRFP forged carbon — both classic weave and forged texture.
• GT2 RS Aero Language: Vented hood, wide front splitter, aggressive rear wing and diffuser — a coherent kit referencing 991.2 GT2 RS aesthetics.
• Complete Kit: Front bumper, splitter, side skirts, rear bumper, and diffuser designed together.
• Lightweight: Noticeably lighter than OEM plastic bumper shells.
• Race-Grade Strength: Carbon fiber offers very high strength for its weight.
• UV & Chemical Protection: Long-life clear coat resists fading and chemical splash.
• OEM-Compatible Mounting: Direct fit to factory chassis/bumper points.

Prepreg (Dry) Carbon vs. Wet Carbon vs. CRFP — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature. Prepreg (dry) carbon is autoclave-cured under high heat and pressure for a more consistent weave. CRFP (forged carbon) is produced by pressing short carbon fibers under high pressure — instead of the classic weave look, it offers a marbled, fragmented aesthetic with high structural strength. This kit combines the best of both technologies.

Vehicle Fitment

This Porsche 911 CRFP GT2 RS carbon body kit fits the following models:

• Porsche 911 991.1 Carrera / Carrera S / 4 / 4S Coupé (2012-2016) — visual + aero upgrade
• Porsche 911 991.1 Carrera GTS Coupé (2014-2016)
• Porsche 911 991.1 Turbo / Turbo S Coupé (2013-2016)
• Porsche 911 991.2 Carrera / S / 4 / 4S / GTS Coupé (2016-2019)
• Porsche 911 991.2 Turbo / Turbo S Coupé (2016-2019)
• Porsche 911 991.2 GT2 RS Coupé (2018) — factory-equivalent package

Important notes:

• This body kit is designed for 991/991.2 Coupé only. Cabriolet and Targa have different rear geometry.
• GT3 / GT3 RS already have wide factory aero packages; confirm fitment before ordering.
• NOT compatible with Porsche 911 992 (2020+).
• NOT compatible with Porsche 911 997 (2005-2012).

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave) + CRFP (Forged Carbon)
• Manufacturing: Autoclave Cure and forged compression molding
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black + forged carbon marbled texture
• Origin: Europe

Installation Notes

Body kit installation is comprehensive — professional installation is strongly recommended.

1. Raise the vehicle and remove the front bumper (disconnect headlight and washer hoses).
2. Remove side skirt mounting bolts.
3. Detach the rear bumper from behind the exhaust.
4. Dry-fit the new carbon panels and verify alignment.
5. Secure with 3M VHB tape + supplied hardware to the manufacturer's recommended torque.
6. Adjust panel gaps and verify headlight alignment.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon sealant every 6 months. Keep pressure washer at least 30 cm from surface. Forged carbon requires the same care as 2x2 twill.

FAQ

Does this body kit fit the Porsche 911 992?
No. The 992 (2020+) has different bumper and panel geometry.

Does this fit the Porsche 911 997?
No. The 997 (2005-2012) is the previous generation.

Compatible with Cabriolet or Targa?
No. 991/991.2 Coupé only.

What is CRFP?
CRFP is a forged carbon material — short carbon fibers pressed under high pressure. Instead of a classic weave, it produces a marbled, fragmented look with high strength.

I own a GT2 RS — is this a replacement for the factory package?
Yes. For 991.2 GT2 RS owners, this kit is a carbon equivalent referencing the factory aero language.

I own a Carrera or Turbo — is this for me?
Yes. It's a GT2 RS-styled visual upgrade for 991/991.2 Carrera, GTS, Turbo and Turbo S Coupé.

What's included?
Typical contents: front bumper (with splitter), side skirts, rear bumper (with diffuser), and large rear wing/spoiler. Confirm detailed scope before ordering.

Shipping time?
In-stock items ship within 1-3 business days; oversized packaging across multiple boxes may apply.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes Porsche 911 carbon parts, Porsche carbon spoilers, Audi RS carbon diffusers, BMW M3 carbon hoods, and many more high-quality carbon components.