Audi S3/A3 8V (2012-2020) Prepreg Dry Carbon Fiber V2 Front Lip

Engineered for Audi S3 8V and A3 8V (2012-2020) owners, this Prepreg (Dry) Carbon Fiber V2 Front Lip adds a more aggressive second-generation race-inspired splitter geometry to the lower edge of the factory front bumper. Manufactured in Europe to factory-spec tolerances and quality-controlled by BYC Performance, this Audi S3/A3 V2 carbon lip bolts directly to OEM mounting points — no cutting, no drilling, no modification.

The V2 profile features a deeper, wider splitter area than the standard front lip version in our catalog, designed for Audi S3 tuning and A3 8V modification projects seeking maximum aggression. It complements the S3 8V's 2.0 TFSI EA888 turbo (286-310 hp) and A3 8V's 1.4/2.0 TFSI EA888/EA211 (122-184 hp) powertrains with an added sport identity. Autoclave-cured prepreg carbon is noticeably lighter than wet lay-up and offers a far longer service life.

Key Features

• Prepreg (Dry) Carbon Technology: Pre-impregnated plies cured in an autoclave under high heat and pressure for a more consistent weave.
• V2 Aggressive Splitter Profile: Deeper, more pronounced splitter than the standard front lip — race-inspired aggressive look.
• Lightweight: Noticeably lighter than factory plastic accessories.
• High Strength: Carbon fiber offers very high strength for its weight; resists stone chips.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under a high-gloss UV-protective clear coat.
• Direct OEM Fit: Mates precisely to the factory S3/A3 8V front bumper lower edge.
• UV & Chemical Protection: Long-life clear coat resists fading, cracking, and road tar splash.

Prepreg (Dry) Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are produced using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Audi S3/A3 8V V2 carbon front lip is compatible with the following models:

• Audi A3 8V Sportback (2012-2020) — 1.4/2.0 TFSI EA888/EA211, 1.6/2.0 TDI
• Audi A3 8V Sedan (2013-2020)
• Audi A3 8V Cabriolet (2014-2020)
• Audi S3 8V Sportback (2013-2020) — 2.0 TFSI EA888, 286 hp (pre-facelift) / 310 hp (facelift)
• Audi S3 8V Sedan (2013-2020)
• Audi S3 8V Cabriolet (2014-2020)

Important notes:

• This product is NOT compatible with the RS3 8V. The RS3 has different front bumper and air duct geometry; RS3 owners should check our RS3 canard SKU or contact BYC for options.
• This product is NOT compatible with the Audi A3 8Y (2020+) next-generation chassis.
• This product is NOT compatible with the previous-generation Audi A3 8P (2003-2012).
• The V2 profile is more aggressive than the standard S3/A3 8V front lip in our catalog; the two versions are distinct SKUs.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss UV-Protective Clear Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

Installing the Audi S3/A3 carbon front lip involves bonding and fastening to the front bumper lower edge. Professional installation is recommended:

1. Clean and dry the bumper lower edge with isopropyl alcohol.
2. Test-fit the lip; mark center and side reference points.
3. Secure using 3M VHB tape and supplied fasteners to the manufacturer's recommended torque.
4. Do not wash the vehicle for 24 hours; avoid high-pressure washing for 48 hours.
5. Check ground clearance over speed bumps to avoid contact damage.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from the surface. The lip's underside may be exposed to stone chips; periodic inspection is recommended.

FAQ

What's the difference between the V2 front lip and the standard front lip?
The V2 has a deeper, wider, more aggressive splitter profile. The standard front lip offers a more subtle downward extension. They are distinct SKUs.

Does it fit the RS3 8V?
No. The RS3 has different front bumper and air duct geometry; RS3 owners should check our RS3 canard SKU or contact BYC for options.

Does it fit Sportback, Sedan, and Cabriolet?
Yes. All A3/S3 8V body styles share the same front bumper lower geometry.

Any difference between pre-facelift and facelift?
No. 2013-2016 and 2017-2020 models share the same front bumper lower edge geometry.

Does it fit the 8Y?
No. 8Y is the next-generation chassis with different front bumper geometry.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof and weather-resistant.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. 1-2 day delivery across Turkey.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes Audi S3 carbon parts, Audi RS carbon diffusers, BMW M3 carbon front lips, Porsche carbon spoilers, and many more high-quality carbon components. Every part we source undergoes strict quality control.