Audi S5/A5 B9/B9.5 Prepreg Dry Carbon Fiber Front Lip

Designed for Audi S5/A5 B9 and B9.5 owners, this Prepreg Dry Carbon Fiber Front Lip adds a lowered, aggressive look and front-axle aerodynamic benefit to your car. Manufactured in Europe and quality-controlled by BYC Performance, this Audi S5/A5 carbon front lip mounts directly to the OEM front bumper lower edge on both B9 pre-facelift and B9.5 facelift coupés, sportbacks, and cabriolets.

If you're building an Audi A5/S5 B9 tuning project and want a track-grade front-axle visual statement, this dry carbon front lip is for you. Autoclave-cured prepreg carbon is noticeably lighter than wet-lay parts, with superior strength and excellent UV resistance. Complements the S5 B9/B9.5's 3.0 TFSI V6 single-turbo (349-354 hp) and the A5's 2.0 TFSI EA888 character with an aggressive front-end accent.

Key Features

• Prepreg Dry Carbon Technology: Pre-impregnated plies cured in an autoclave under high heat and pressure — homogeneous resin, a consistent weave.
• Lowered Front Profile: Adds low-stance presence to the front bumper lower edge.
• High Strength: Carbon fiber offers very high strength for its weight; resists light contact and road debris.
• Aerodynamic Edge Line: Accelerates air close to the ground at the front axle, contributing to front downforce.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under a high-gloss UV-protective clear coat.
• B9 + B9.5 Dual Fit: Mounts to Audi A5/S5 B9 (2016-2019) and B9.5 (2019-2024) OEM front bumper lower edge.
• UV & Chemical Protection: Long-life clear coat resists fading, cracking, and road grime.

Prepreg Dry Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts use wet lay-up, where resin is applied by hand and cured at room temperature — which can leave air voids and inconsistent weight. Prepreg dry carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• Made with a controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Audi S5/A5 B9/B9.5 front lip fits:

• Audi A5 Coupé B9 (2016-2019) and B9.5 (2019-2024) — 2.0 TFSI / 2.0 TDI
• Audi A5 Sportback B9/B9.5 (2016-2024)
• Audi A5 Cabriolet B9/B9.5 (2017-2024)
• Audi S5 Coupé B9/B9.5 (2016-2024) — 3.0 TFSI V6
• Audi S5 Sportback B9/B9.5 (2016-2024) — 3.0 TFSI V6
• Audi S5 Cabriolet B9/B9.5 (2017-2024) — 3.0 TFSI V6

Important notes:

• Although B9 and B9.5 front bumper details differ, the lower lip mounting line is compatible across both generations. Please verify your vehicle's bumper code before ordering.
• NOT compatible with RS5 B9/B9.5. The RS5 factory front bumper has different geometry; RS5 owners should contact BYC for front-lip options.
• NOT compatible with previous-generation B8/B8.5 A5/S5 (2008-2015).

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

Designed to add to the OEM front bumper lower edge. Professional installation is recommended:

1. Degrease the front bumper lower edge with isopropyl alcohol.
2. Test-fit the front lip and use any supplied mounting brackets.
3. Apply 3M VHB double-sided tape and press firmly.
4. Torque any supplied fasteners to the manufacturer's recommended values if applicable.
5. Do not wash for the first 24 hours; install at 20°C+ ambient.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface. Take care over speed bumps and ramp entries.

FAQ

Compatible with both B9 and B9.5?
Yes. Both generations share the same front lip mounting line; please confirm bumper code before ordering.

Compatible with RS5 B9/B9.5?
No. The RS5 factory front bumper has different geometry; RS5 owners should contact BYC for front-lip options.

Compatible with Coupé, Sportback, and Cabriolet?
Yes — all three body styles share the same front bumper architecture.

Compatible with previous B8/B8.5 A5?
No. B8/B8.5 (2008-2015) uses different front bumper architecture.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof and weather-resistant.

Risk of scraping?
The lip lowers the front-end height; cross speed bumps at low speed and at an angle, and take care entering ramps.

Shipping time?
In-stock items ship within 1-3 business days. International shipping available.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers. Our catalog includes Audi S5/A5 carbon front lips, Audi RS carbon parts, BMW M carbon front lips, Porsche carbon parts, and more. All parts are sourced from leading European manufacturers and undergo strict quality control.