BMW 3 Series G20 LCI | Prepreg Dry Carbon Fiber TKD Front Lip

BMW 3 Series G20 LCI Prepreg Dry Carbon Fiber TKD Front Lip

Engineered for BMW 3 Series G20 LCI (2023+ facelift) owners, this Prepreg (Dry) Carbon Fiber TKD Front Lip transforms the front of your sedan with aggressive aftermarket tuning lines and adds front-axle downforce at speed. Imported from leading manufacturers around the world and quality-controlled by BYC Performance, this BMW G20 LCI carbon front lip follows the OEM lower edge of the LCI M Sport bumper exactly: no cutting, no drilling.

If you're building a BMW G20 LCI tuning project and need a part that pushes the factory bumper forward with TKD aero lines, this dry carbon TKD front lip is built for you. Autoclave-cured prepreg carbon is noticeably lighter than wet-lay parts, with outstanding long-term UV resistance. Compatible with every G20 LCI engine: from the 4-cylinder B48 in the 320i/330i to the 382 hp B58 inline-six in the M340i.

Key Features

• Prepreg (Dry) Carbon Technology: Pre-impregnated plies cured in an autoclave under high heat and pressure for a more consistent weave.
• TKD Aftermarket Tuning Style: Extended front splitter line and aggressive edge profile for a sportier stance.
• Aerodynamic Gain: Adds front-axle downforce at speed and plants the nose.
• High Strength: Carbon fiber offers very high strength for its weight.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under a high-gloss UV-protective clear coat.
• Direct OEM Fit: Plug & play on the LCI M Sport bumper lower edge.
• UV & Chemical Protection: Long-life clear coat protects against fading, cracking, fuel splash, and road tar.

Prepreg (Dry) Carbon vs. Wet Carbon: Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature, leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Installation Notes

Professional installation is recommended:

1. Wash and degrease the front bumper.
2. Dry-fit the lip against the lower bumper edge.
3. Secure with supplied 3M double-sided tape and hardware.
4. Verify symmetry and allow 24 hours for adhesive cure.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Use caution over speed bumps.

FAQ

Does this fit pre-LCI G20 (2019-2022)?
No. Pre-LCI G20 has different front bumper geometry. The TKD-styled front lip is LCI-specific. Pre-LCI owners should review our generic pre-LCI front-lip listings or contact BYC.

Will it fit if I don't have the LCI M Sport bumper?
No. The TKD Front Lip is only compatible with G20 LCI M Sport bumper.

Compatible with 320i, 330i and M340i?
Yes. All G20 LCI Sedan variants share the same LCI M Sport front bumper geometry.

Is this the same as the BMW M3 G80?
No. M3 G80 uses an entirely different front bumper and aero kit.

Difference between TKD and MP front lip?
MP is the M Performance OEM-look design. TKD is an aftermarket tuning style with wider edge profile and more aggressive lines.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. Parts sourced to order are delivered within 30 days of the order date at the latest.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world and supplying them to the Turkish market. Our catalog includes BMW 3 Series carbon parts, BMW M3 carbon diffusers, Audi RS carbon hoods, Porsche carbon spoilers, and many more.