BMW M2 F87 | Prepreg Dry Carbon Fiber CS Ducktail Spoiler

BMW M2 F87 Prepreg Dry Carbon Fiber CS Ducktail Spoiler

Engineered in CS spec for BMW M2 F87 owners who want a subtle but aggressive trunk silhouette, this Prepreg Dry Carbon Fiber Ducktail Spoiler adds rear downforce at speed without the visual weight of a full DTM wing. Imported from leading manufacturers around the world and quality-controlled by BYC Performance, this BMW M2 F87 carbon CS spoiler matches OEM trunk geometry exactly and installs in minutes via pre-applied 3M automotive tape.

If your BMW M2 F87 tuning direction calls for the OEM M2 CS look without a roof-height wing, this dry carbon CS ducktail follows the factory CS trim profile. It complements the N55-powered M2 Coupé (370 hp) and the S55-powered M2 Competition / CS (410-444 hp), finishing the rear silhouette with proper motorsport restraint. For owners who do want the taller racing profile, the DTM Spoiler is available separately in our catalog.

Key Features

• CS Profile: Carbon reproduction of the OEM M2 CS ducktail trim profile.
• Prepreg Dry Carbon Technology: Autoclave-cured under high heat and pressure, with a more consistent weave and homogeneous resin distribution.
• Pre-Applied 3M Tape: Automotive-grade 3M VHB double-sided tape bonds cleanly to the trunk.
• Aerodynamic Benefit: Subtle profile separates airflow at speed and adds minor rear downforce.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under a high-gloss UV-protective clear coat.
• Lightweight Construction: Noticeably lightweight; no meaningful impact on axle balance.
• No Drilling Required: Tape-on install; no holes in the trunk lid.

Prepreg Dry Carbon vs. Wet Carbon: Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature, leaving air voids and inconsistent weight. Prepreg dry carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and more consistent structure
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Installation Notes

Installing the BMW M2 F87 carbon CS spoiler is a tape-on procedure. DIY-friendly, though professional install is recommended:

1. Clean the trunk surface with IPA (isopropyl alcohol) to remove wax and oils.
2. Ensure surface temperature is between 18-25°C.
3. Dry-fit the spoiler and mark centerline and panel gaps.
4. Peel the 3M tape liner slowly and press the spoiler in place.
5. Apply firm pressure for 30 seconds across the entire bond area.
6. Do not wash the vehicle for the first 24 hours to allow tape to fully cure.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer at least 30 cm from surface and avoid spraying directly into the tape seam.

FAQ

Does this spoiler require drilling into the trunk?
No. It bonds with pre-applied 3M VHB automotive tape; no drilling or screws required.

Does this fit the BMW M2 G87 (2023+)?
No. F87 and G87 have different trunk lid geometry.

Compatible with both M2 base (N55) and M2 Competition (S55)?
Yes. All F87 variants (N55 Coupé, S55 Competition, S55 CS) share the same trunk lid profile.

Is it safe in an automatic car wash?
Yes. After the first 7 days, brush-style automatic washes are fine.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. International shipping available. Parts sourced to order are delivered within 30 days of the order date at the latest.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world and supplying them to the Turkish market. Our catalog includes BMW M2 carbon parts, BMW M3 carbon diffusers, Audi RS carbon hoods, Porsche carbon spoilers, and many more high-quality carbon components.