BMW M3 F80 / M4 F82 | Prepreg Dry Carbon Fiber GTS Vented Hood

BMW M3 F80 / M4 F82 Prepreg Dry Carbon Fiber GTS Vented Hood

Engineered for BMW M3 F80 and M4 F82 owners, this Prepreg Dry Carbon Fiber GTS Vented Hood brings the iconic M4 GTS limited edition silhouette to your front end while delivering functional heat extraction for the S55 engine bay. Made to factory-spec tolerances by leading manufacturers around the world and quality-controlled by BYC Performance, this BMW F80 / F82 carbon GTS hood bolts directly to OEM hinge points: no cutting, no drilling, no modification required.

If your BMW M3 F80 tuning or M4 F82 modification build needs a part that exceeds the factory aluminum hood in both performance and presence, this dry carbon GTS hood is built for you. Autoclave-cured prepreg carbon fiber makes the hood noticeably lighter than the factory aluminum unit, lowering the front upper mass and sharpening dynamic balance. Engineered to match the aggressive character of the S55B30T0-powered previous-generation M3/M4 family (425 hp standard, 444 hp Competition, 460 hp CS, 493 hp GTS), with twin functional side vents inspired by the limited M4 GTS.

Key Features

• Prepreg (Dry) Carbon Technology: Autoclave-cured under high heat and pressure; a more consistent weave, homogeneous resin distribution.
• GTS Limited Edition Styling: Re-interprets the iconic M4 GTS twin side heat-extractor geometry.
• Functional Heat Extraction: Vents pull hot air out of the engine bay, lowering S55 turbo manifold temperatures and improving cooling margin on track.
• Noticeable Weight Reduction: Noticeably lighter than the factory aluminum hood; lowers front upper mass.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under a high-gloss UV-protective clear coat.
• OEM Geometry: Compatible with factory F80/F82 hinge points, hood latch mechanism, and washer nozzles.
• High Strength: Carbon fiber offers very high strength for its weight; track and street durable.

Prepreg (Dry) Carbon vs. Wet Carbon: Which Is Better?

Most aftermarket carbon parts use wet lay-up with hand-applied resin cured at room temperature, leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Installation Notes

Installing the BMW F80 / F82 carbon GTS hood is a direct replacement of the factory aluminum part. Professional installation is strongly recommended:

1. Open the hood and expose hinge bolts; disconnect washer fluid lines.
2. With a second person, remove the original aluminum hood from the hinges.
3. Because the carbon hood is lighter than the aluminum original, lower-force gas struts (e.g., 50N) may be needed for proper opening behavior, supplied with the product or sold separately.
4. Bolt the new carbon hood to the hinges and torque progressively to the manufacturer's recommended values.
5. Reconnect washer fluid lines and nozzles.
6. Verify hood-to-fender-to-headlight alignment and fine-tune hinge slot bolts.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface.

FAQ

Does this hood fit the G80 / G82?
No. G80 (M3 Sedan) and G82 (M4 Coupé) are 2021+ next-generation M cars with a completely different hood shape and the S58 engine. A separate G-generation carbon hood is available in our catalog.

Is there a hood-fitment difference between F80 Sedan and F82 Coupé?
No. F80 sedan and F82 coupé / F83 convertible share the same hood dimensions and hinge geometry.

Compatible with M4 CS, GTS, and Competition trims?
Yes. All F80/F82 trims (standard, Competition, CS, GTS) share the same hood mounting geometry.

Does this hood fit the BMW M2 F87?
No. M2 F87 uses a shorter hood with different geometry.

Does it fit the F83 Cabriolet?
Yes. F83 Convertible uses the same hood as F82.

Are gas struts required?
Because the carbon hood is lighter than the factory aluminum unit, the original gas struts may push the hood up too forcefully. Lower-force struts (e.g., 50N) are recommended.

Are the vents actually functional?
Yes. The side vents extract hot air from the engine bay, lowering turbo manifold temperatures, especially valuable on track.

Shipping time?
In-stock items ship within 1-3 business days. International shipping available. Parts sourced to order are delivered within 30 days of the order date at the latest.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world and supplying them to the Turkish market. Our catalog includes BMW M3 carbon parts, BMW M4 carbon diffusers, Audi RS carbon hoods, Porsche carbon spoilers, and many more high-quality carbon components. Our parts are sourced from leading manufacturers around the world and undergo strict quality control.