BMW M3 F80 / M4 F82 | Prepreg Dry Carbon Fiber VRS Vented Hood

BMW M3 F80 / M4 F82 Prepreg Dry Carbon Fiber VRS Vented Hood

Engineered for BMW M3 F80 and M4 F82 owners, this Prepreg Dry Carbon Fiber VRS Vented Hood uses aggressive VRS-style outlet vents to extract heat from the engine bay and support engine performance. Autoclave-cured by leading manufacturers around the world and quality-controlled by BYC Performance, this BMW F80 / F82 carbon hood is a direct replacement for the aluminum OEM hood.

Matched to the high-performance character of the S55B30T0 twin-turbo previous-generation M3/M4 family (425 hp standard, 444 hp Competition, 460 hp CS, 493 hp GTS), this VRS dry carbon hood is noticeably lighter than the OEM hood. That reduces nose mass, improves front-axle response, and lowers engine bay temperatures. The single most effective carbon upgrade for any BMW M3 F80 tuning or M4 F82 modification project.

Key Features

• Prepreg Dry Carbon Technology: Autoclave-cured under high heat and pressure, a more consistent weave.
• VRS-Style Vents: Twin aggressive outlets evacuate hot engine bay air.
• Noticeably Lighter: Meaningful weight savings over the OEM aluminum hood.
• Engine Bay Cooling: Vent outlets lower intake and turbo zone temperatures.
• OEM Hinge Compatibility: Direct bolt to factory hinge points.
• Gas Strut Compatibility: Works with OEM gas struts; strut upgrade not required due to lightweight build.
• 2x2 Twill Carbon Weave: Authentic carbon under UV-protective clear coat.

Prepreg Dry Carbon vs. Wet Carbon: Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature, leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Installation Notes

The BMW F80 / F82 VRS carbon hood mounts to OEM hinges and gas struts. Professional installation recommended:

1. Transfer the OEM sound insulation pad (if equipped) to the new hood.
2. Loose-fit the hood at the hinges and align panel gaps to OEM fender lines.
3. Reattach OEM gas struts; verify the lightweight hood is fully held up.
4. Adjust the latch for proper closing.
5. Once aligned, fully torque the hinge bolts.

Care & Maintenance

Use pH-neutral car shampoo. Keep pressure washer nozzles at least 30 cm away. Keep vent channels clear of leaves and debris. Apply carbon-safe sealant every 6 months.

FAQ

Does this hood fit the G80 / G82?
No. G80/G82 (2021+) use a different hood geometry and hinge points.

Same hood for F80 Sedan and F82 Coupé?
No. F80 sedan and F82/F83 coupé/convertible hoods are different; this product is built per your model at order. Please specify your model.

Compatible with M4 CS, GTS, and Competition trims?
Yes. All F80/F82 trims share the same hinge geometry within the model-specific build.

Does this hood fit the M2 F87?
No. M2 F87 uses a different hood geometry.

Does it fit the F83 Cabriolet?
Yes. F83 Convertible matches the F82 build.

Will OEM gas struts work?
Yes. The lightweight carbon hood holds open with OEM struts. Only very worn struts may fail to hold; in that case install fresh OEM struts.

Do the vents let water into the engine bay?
Vent outlets are on top of the engine bay; internal drainage channels divert water directly outside.

Shipping & warranty?
In-stock items ship within 1-3 business days. Parts sourced to order are delivered within 30 days of the order date at the latest. Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world and supplying them to the Turkish market. Our catalog includes BMW M3 carbon parts, BMW M4 carbon diffusers, Audi RS carbon hoods, Porsche carbon spoilers, and many more high-quality carbon components.