BMW M3 G80 / M4 G82 Prepreg Dry Carbon Fiber Hood

Engineered for BMW M3 G80 and M4 G82 owners, this Prepreg Dry Carbon Fiber Hood replicates the OEM aluminum hood lines exactly while adding a sophisticated carbon accent to the front end. Manufactured in Europe to factory-spec tolerances and quality-controlled by BYC Performance, this BMW G80 / G82 carbon hood bolts directly to OEM hinges and gas-strut mounting points.

If you're building a serious BMW M3 G80 tuning or M4 G82 modification project and need to reduce front-axle weight while exceeding factory finish quality, this dry carbon hood is built for you. Autoclave-cured prepreg carbon is noticeably lighter than the OEM aluminum hood — improving steering response and shortening braking distance. Fits all S58-powered current-generation cars — M3 G80 Sedan, M3 Touring G81, M4 G82 Coupé and M4 G83 Convertible (473-543 hp) — across every trim, including Competition, CS and CSL.

Key Features

• Prepreg Dry Carbon Technology: Autoclave-cured under high heat and pressure for a more consistent weave.
• OEM-Style Design: Mirrors the factory G80/G82 hood lines exactly — subtle carbon presence.
• Noticeably Lighter: Meaningful reduction vs. OEM aluminum hood.
• High Strength: Carbon fiber offers very high strength for its weight.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under high-gloss UV-protective clear coat.
• Direct OEM Fit: Plug & play on M3 G80 Sedan and M4 G82/G83 Coupé/Convertible hinges and latch.
• Inner Frame Structure: Carbon inner frame matches OEM torsional rigidity.

Prepreg Dry Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This BMW G80 / G82 carbon hood fits the following models:

• BMW M3 G80 Sedan (2021, 2022, 2023, 2024, 2025) — S58 (473 hp)
• BMW M3 Competition G80 (2021+) — S58 (503 hp)
• BMW M3 CS G80 (2023+, limited) — S58 (543 hp)
• BMW M3 Touring G81 (2022+) — S58 (503 hp)
• BMW M4 G82 Coupé (2021+) — S58 (473/503 hp)
• BMW M4 Competition G82 (2021+) — S58 (503 hp)
• BMW M4 CSL G82 (2022-2023, limited) — S58 (543 hp)
• BMW M4 G83 Convertible / Cabriolet (2021+) — S58 (503 hp)

NOTE: This hood is NOT compatible with the previous-generation BMW M3 F80 / M4 F82 (S55) or BMW M2 G87 — both use different hood hinge geometry.

Technical Specifications

• Material: Pre-Preg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Inner Structure: Carbon inner frame (OEM-equivalent rigidity)
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

Professional installation recommended:

1. Remove the OEM hood from hinges; disconnect gas struts.
2. Position the carbon hood and snug the alignment bolts.
3. Set 4-5 mm uniform gap with bumper, fenders, and headlights.
4. Torque the bolts to the manufacturer's recommended torque.
5. Test the hood latch and adjust if necessary.

Care & Maintenance

Use pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface. Do not wash a hot engine bay.

FAQ

Compatible with both M3 G80 and M4 G82?
Yes. The hinge and latch geometry is identical across M3 G80 Sedan, M4 G82 Coupé, and M4 G83 Convertible.

Compatible with M3 CS / M4 CS / M4 CSL?
Yes. All G80/G82 trims share the same hood hinge geometry.

Does it fit the BMW M2 G87?
No. M2 G87 uses different hood geometry.

Compatible with M3 F80 / M4 F82 (previous gen)?
No. The F-generation uses different hinge and latch positions.

Does this hood have vents?
No. This is the OEM-style clean-line hood. A separate CSL-style vented hood SKU is available in our catalog.

Are OEM gas struts reused?
Yes. Original gas struts work fine.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes BMW M3 carbon parts, BMW M4 carbon diffusers, Audi RS carbon hoods, Porsche carbon spoilers, and many more high-quality carbon components. All parts undergo strict quality control.