BMW M5 F10 Prepreg Dry Carbon Fiber Air Intake Hood

Engineered for BMW M5 F10 (2011-2016) owners, this Air Intake Carbon Fiber Hood features an aggressive top-mounted scoop that ducts fresh air directly toward the engine, delivering a track-ready look for your F10 M5. Manufactured in Europe to factory-spec tolerances and quality-controlled by BYC Performance, this M5 F10 carbon air intake hood bolts directly to OEM hinge and latch points.

The F10 M5's S63B44T2 4.4L V8 biturbo (560-575 hp) demands high airflow. The top-mounted intake scoop forces cool air into the engine bay at speed — critical cooling support for the twin-turbocharged engine. Autoclave-cured prepreg carbon fiber is noticeably lighter than the OEM steel hood.

Key Features

• Top-Mounted Air Intake Scoop: Channels fresh air into the engine bay at speed; supplemental cooling for the twin-turbo S63B44T2.
• Prepreg (Dry) Carbon Technology: Autoclave-cured under high heat and pressure, a more consistent weave.
• Worthwhile Weight Saving: Noticeably lighter than the OEM steel hood.
• 2x2 Twill Carbon Weave: Authentic pattern under a high-gloss UV-protective clear coat.
• Direct OEM Fit: Bolts to F10 M5 hinge and latch points.
• UV & Chemical Protection: Durable clear coat against fading and chemicals.
• Aerodynamic Appearance: Scoop reduces engine bay temperature and adds visual aggression.

Prepreg (Dry) Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon is produced with wet lay-up. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This BMW M5 F10 air intake carbon hood fits the following models perfectly:

• BMW M5 F10 Sedan (2011-2013) Pre-LCI — S63B44T2 560 hp
• BMW M5 F10 Sedan LCI (2013-2016) — 560 hp
• BMW M5 F10 Competition Package (2014-2016) — 575 hp
• BMW M5 F10 30 Jahre M5 (2014 limited) — 600 hp

Important notes:

• NOT compatible with the BMW M5 E60 (2005-2010).
• NOT compatible with the BMW M5 F90 (2018-2024).
• Other F10 hood variants in our catalog: DTM Vented Hood (motorsport-derived) and Vented Hood (classic vent panels). The Air Intake version features the top-mounted scoop for the most aggressive intake look.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

1. Secure the vehicle on level ground, prop the hood open.
2. Remove stock hood hinge bolts, disconnect sensor/washer lines.
3. Mount the new carbon hood on the hinges, align.
4. Torque the hinge bolts to the manufacturer's recommended torque.
5. Adjust hood gap to bumper and fenders.
6. Verify the intake scoop aligns with the engine bay opening.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm away.

FAQ

Is the intake scoop functional?
Yes. It ducts fresh air into the engine bay at speed, supporting cooling for the twin-turbo S63B44T2.

Does it fit the E60?
No.

Does it fit the F90?
No.

What's the difference between the three F10 hood variants?
Air Intake (this product) = top-mounted scoop. DTM = motorsport-derived aggressive surface lines. Vented = classic vent panels.

Will rain enter the engine bay?
The scoop has internal drainage geometry; normal rain does not pool in the engine bay.

Shipping time?
Oversized freight, 3-7 business days via partner couriers.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers. Our catalog includes BMW M5 F10 carbon hoods, BMW M5 air intake carbon, BMW M carbon hoods, and many more high-quality carbon components.