BMW M5 F90 LCI Prepreg Dry Carbon Fiber MP Front Lip

Engineered for BMW M5 F90 LCI owners who demand racing-grade quality, this Prepreg Dry Carbon Fiber MP Front Lip transforms the front fascia of your 2021+ facelift M5 sedan with aggressive M Performance styling while improving low-speed aerodynamics. Manufactured in Europe to factory-spec mounting tolerances and quality-controlled by BYC Performance, this BMW M5 F90 LCI carbon front lip bolts directly to OEM mounting points — no cutting, no drilling, no modification required.

If you're building a serious BMW M5 F90 LCI tuning project and need a part that exceeds the factory plastic part in both performance and finish, this dry carbon front lip is built for you. Autoclave-cured prepreg carbon fiber is noticeably lighter than wet-lay carbon parts, with strong structural integrity and outstanding long-term UV resistance. Engineered to match the aggressive character of the S63-powered F90 LCI M5 — 600 hp standard, 617 hp Competition, and 635 hp CS — this lip is the ideal aesthetic and functional upgrade for both road and track use.

Key Features

• Prepreg (Dry) Carbon Technology: Pre-impregnated carbon plies cured in an autoclave under high heat and pressure ensure more consistent resin distribution and a more consistent weave.
• M Performance Styling: Carbon version of the LCI-specific MP front lip design. Noticeably lighter than the factory plastic part.
• Race-Grade Strength: Carbon fiber offers very high strength for its weight. Resists stone chips and light contact.
• Aerodynamic Performance: Directs front airflow to reduce front-axle lift and stabilize high-speed handling.
• 2x2 Twill Carbon Weave: Authentic carbon fiber pattern under a high-gloss UV-protective clear coat.
• Direct OEM Fit: Plug & play installation on factory F90 LCI (2021+) front bumper clips.
• UV & Chemical Protection: Long-life clear coat protects against fading, cracking, fuel splash, and road tar.

Prepreg (Dry) Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This BMW M5 F90 LCI front lip fits the following models perfectly:

• BMW M5 F90 LCI Sedan (2021, 2022, 2023) — S63 V8 (600 hp)
• BMW M5 Competition F90 LCI (2021, 2022, 2023) — S63 (617 hp)
• BMW M5 CS (limited 2022) — S63 (635 hp)

Important notes:

• This product is NOT compatible with the F90 pre-LCI (2018-2020). Pre-LCI has different front bumper geometry; a separate pre-LCI carbon front lip is available in our catalog.
• This product is NOT compatible with BMW M5 F10 (previous-generation 2011-2017) or BMW M5 G90 (new-generation 2024+ hybrid).
• This product is NOT compatible with BMW M3 F80 / M4 F82 or BMW M3 G80 / M4 G82 — the M3/M4 family has different bumper geometry.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

Installing the BMW M5 F90 LCI carbon front lip mounts directly to factory bumper clips and bolt locations. Professional installation is recommended:

1. Raise the vehicle and clean the lower bumper area.
2. Test-fit the lip and mark center and outer clip points.
3. Secure with supplied clips and M6 bolts to the manufacturer's recommended torque.
4. Verify clearance around parking sensors and cameras.
5. 3M double-sided tape may be added for extra support during professional install.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface.

FAQ

Does this fit the F90 pre-LCI (2018-2020)?
No. The F90 LCI facelift has different front bumper geometry. A separate carbon front lip for pre-LCI is available in our catalog — look for pre-LCI labeled products.

Compatible with both standard M5 LCI and M5 Competition LCI?
Yes. This lip fits standard M5 F90 LCI (600 hp), M5 Competition F90 LCI (617 hp), and M5 CS (635 hp) — front bumper geometry is identical across all LCI trims.

Is this the same as the BMW M5 F10?
No. M5 F10 (2011-2017) is the previous generation with completely different body panels. A separate carbon front lip for the F10 is available in our catalog.

Does it fit BMW M3 F80 / M4 F82?
No. M3 F80 and M4 F82 have different chassis and bumper geometry. Separate F-series M3/M4 carbon front lips are available in our catalog.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof and weather-resistant.

Shipping time?
In-stock items ship within 1-3 business days. International shipping available.

Warranty?
BYC Performance offers a 12-month manufacturer warranty on this product.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes BMW M5 carbon parts, BMW M3 carbon diffusers, Audi RS carbon hoods, Porsche carbon spoilers, and many more high-quality carbon components.