Lamborghini Huracán Prepreg Dry Carbon Fiber SD Spoiler

Built for Lamborghini Huracán Gen 1 (LP610-4 / LP580-2 / Performante, 2014-2018) owners who want a more aggressive rear silhouette, this Prepreg Dry Carbon Fiber SD Spoiler adds a clean deck-mounted wing profile and meaningful rear downforce. Manufactured in Europe and quality-controlled by BYC Performance, the Huracán SD carbon spoiler mounts to the OEM trunk lid with a 3M VHB tape and stud-bolt combination.

If your Lamborghini Huracán tuning build needs a serious rear aero statement, the SD carbon spoiler raises the rear deck line with a sharp, motorsport-leaning wing profile. At sustained high speed from the 5.2L V10 (610-640 hp), the angled blade adds noticeable rear-axle downforce. Note this is a distinct design from our V Spoiler (lip-profile) and V Full Spoiler (tall pedestal-mounted) SKUs.

Key Features

• Prepreg (Dry) Carbon Technology: Autoclave cure under high heat and pressure gives a more consistent weave.
• SD Design Language: Clean, aggressive deck-mounted wing profile.
• Aerodynamic Gain: Adds noticeable rear-axle downforce at high speed.
• Weight Savings: Lighter than plastic aftermarket equivalents.
• 2x2 Twill Carbon Weave: Authentic weave under high-gloss UV-protective clear coat.
• Precise OEM Fit: Matched to Gen 1 Huracán trunk lid curvature.
• 3M VHB + Stud Bolt: Dual mounting prevents lift at high speed.

Prepreg (Dry) Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts use wet lay-up. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → light and well-balanced
• The production method widely chosen in motorsport
• Minimal UV fading over years

Vehicle Fitment

This Lamborghini Huracán SD spoiler fits:

• Huracán LP610-4 Coupé (2014-2018) — V10 5.2L FSI (610 hp)
• Huracán LP580-2 RWD Coupé (2016-2018) — V10 5.2L (580 hp)
• Huracán Performante (2017-2019) — V10 5.2L (640 hp) — Performante ships with factory wing; removing it is required
• Huracán LP610-4 / LP580-2 Spyder (2015-2018) — verify deck curvature before order

Important notes:

• NOT compatible with Huracán EVO / EVO RWD / STO / Tecnica / Sterrato (2019-2024).
• NOT compatible with Audi R8 Type 4S.
• Distinct from V Spoiler (lip-profile) and V Full Spoiler (tall pedestal).

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

1. Clean the trunk lid with isopropyl alcohol.
2. Dry-fit the spoiler and mark the centerline with masking tape.
3. Peel the 3M VHB tape and apply with firm pressure.
4. Torque stud bolts to the manufacturer's recommended torque (watch trunk lid sheet thickness).
5. Avoid washing for 24 hours so the adhesive fully cures.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer at least 30 cm from the surface.

FAQ

Is this the same as V Spoiler or V Full Spoiler?
No. SD is a sharper deck-mounted wing; V Spoiler is a lip profile; V Full Spoiler is a tall pedestal-mounted wing. Three separate SKUs.

Compatible with Huracán EVO?
No. EVO trunk lid curvature differs.

Compatible with Audi R8?
No.

Compatible with Huracán Spyder?
Verify rear deck curvature before ordering; soft-top hinge geometry may interfere.

Compatible with Performante?
Performante ships with a factory wing; remove it before installing this spoiler.

Shipping time?
In-stock items ship within 1-3 business days from Turkey via partner couriers.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers. Our catalog includes Lamborghini Huracán carbon parts, Audi RS carbon parts, BMW M carbon parts, Porsche carbon spoilers, Ferrari carbon parts, and more.