Mercedes-Benz AMG A45 / CLA45 (W176 / C117) Prepreg Dry Carbon Fiber Engine Cover

Engineered for Mercedes-AMG A45 (W176, 2013-2018) and CLA45 (C117, 2013-2019) owners who demand tuner-grade quality, this Prepreg Dry Carbon Fiber Engine Cover transforms your engine bay into a genuine AMG showpiece the moment you pop the hood. Manufactured in Europe and quality-controlled by BYC Performance, this AMG carbon engine cover bolts directly to OEM clip points on the M133 2.0L turbo I4. No cutting, no drilling, no modification required.

If you're building a serious A45 tuning or CLA45 tuning project and want a part that exceeds the factory plastic engine cover in both finish and presence, this dry carbon engine cover is built for you. Autoclave-cured prepreg carbon fiber is noticeably lighter than wet-lay carbon parts, more durable, and offers outstanding long-term UV resistance. The M133 2.0L turbo engine in the W176/C117 generation A45/CLA45 (360-381 hp) was the most powerful production 4-cylinder of its time — your engine cover should match that legacy.

Key Features

• Prepreg Dry Carbon Technology: Pre-impregnated carbon plies cured in an autoclave under high heat and pressure ensure homogeneous resin distribution and a more consistent weave.
• Direct OEM Fit: Plug & play installation on factory M133 engine bay clip mounts of W176 A45 and C117 CLA45.
• Cross-Fit Design: Single part covers two chassis sharing the same M133 engine (W176 hatch + C117 CLA).
• Lightweight: Noticeably lighter than the factory plastic engine cover.
• High Strength: Carbon fiber offers very high strength for its weight. Withstands engine bay heat loads.
• 2x2 Twill Carbon Weave: Authentic carbon fiber pattern under a high-gloss UV-protective clear coat.
• High-Temperature Resistance: High-Tg autoclave-cured resin engineered for engine bay thermal exposure.

Prepreg Dry Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and more durable
• The production method widely chosen in motorsport
• Minimal UV fading over years of use
• No deformation at engine bay temperatures

Vehicle Fitment

This AMG carbon engine cover fits the following models perfectly:

• Mercedes-AMG A45 W176 (2013, 2014, 2015, 2016, 2017, 2018) — M133 2.0L Turbo (360-381 hp)
• Mercedes-AMG A45 4MATIC W176 facelift (2015-2018)
• Mercedes-AMG CLA45 C117 (2013, 2014, 2015, 2016, 2017, 2018, 2019) — M133 2.0L Turbo
• Mercedes-AMG CLA45 Shooting Brake X117 (2015-2019) — M133 2.0L Turbo

Important notes:

• This product is NOT compatible with W177 (A-class 2018+) or C118 (CLA 2019+). The W177/C118 generation uses the M139 engine with completely different engine bay geometry.
• NOT compatible with standard M260 / M270 powered A180/A200/A220/A250 (W176/C117) — this cover is engineered for the M133 AMG engine bay only.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

Installing the AMG carbon engine cover is a direct replacement of the factory part. General steps:

1. Open the hood and lift the plastic engine cover straight up to release it from its clip mounts.
2. Test-fit the carbon engine cover for alignment.
3. Press the cover firmly onto the engine clip mounts.
4. Verify all clips have fully engaged.

Care & Maintenance

Wipe with pH-neutral car shampoo and warm water. Do not wipe with a wet cloth on a hot engine (thermal shock). Apply carbon-safe sealant every 6 months.

FAQ

Does this fit W177 A45 (2018+)?
No. The W177 generation has different engine-bay geometry; W177 owners should contact BYC for engine-cover availability.

Compatible with standard A180/A200 engines?
No. This cover is designed exclusively for the M133 AMG engine. Standard M260/M270 powered A-class and CLA models use a different plastic cover.

Does it fit both W176 hatch and C117 CLA?
Yes. Both chassis share the same M133 engine bay and cover geometry.

Compatible with CLA45 Shooting Brake (X117)?
Yes. The X117 CLA Shooting Brake uses the same M133 engine bay as the C117 CLA45.

Will engine heat damage dry carbon parts?
No. Autoclave-cured high-Tg prepreg carbon is engineered to withstand engine bay thermal loads.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. International shipping available.

Warranty?
BYC Performance offers a 12-month manufacturer warranty on this product.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes Mercedes-AMG carbon parts, A45/CLA45 carbon engine covers, BMW M carbon parts, Porsche carbon spoilers, and many more high-quality carbon components.