Mercedes-Benz AMG CLA C118 | Prepreg Dry Carbon Fiber Mirror Cap

Mercedes-Benz AMG CLA C118 (2019+) Prepreg Dry Carbon Fiber Mirror Cap

Designed for Mercedes-Benz AMG CLA C118 second-generation (2019+) owners, this Prepreg Dry Carbon Fiber Mirror Cap set replaces the factory painted plastic caps with carbon-finish caps, instantly elevating the premium AMG side profile of your car. Made to factory-spec tolerances by leading manufacturers around the world and quality-controlled by BYC Performance, this CLA C118 carbon mirror cap set installs to OEM clip points (plug & play), no cutting required.

Mirror caps are one of the most visible small exterior details on the CLA. Swapping to carbon caps gives a lasting AMG-style visual upgrade in place of the OEM dual-tone painted caps, while also being more resistant to stone chips and micro-scratches. Ships as a left + right pair.

Key Features

• Prepreg (Dry) Carbon Technology: Autoclave-cured under high heat and pressure; a more consistent weave.
• Fits All CLA C118 Trims: CLA200, CLA220, CLA250, CLA35, CLA45 / CLA45 S. All trims share the same mirror housing.
• Plug & Play Install: Remove stock caps, snap on the carbon caps. Clip-fit, no glue or cutting needed.
• 2x2 Twill Carbon Weave: Authentic carbon look under high-gloss UV-protective resin.
• Left + Right Pair: Ships as a complete left (driver) + right (passenger) set.
• UV & Chemical Protection: High-gloss clear resin protects against sun, rain, and wash chemicals.
• Lightweight: Minimal weight addition over the plastic OEM caps, does not affect mirror motor mechanisms.

Prepreg (Dry) Carbon vs. Wet Carbon

Most aftermarket carbon parts use wet lay-up: resin applied by hand, voids remain. Prepreg (dry) carbon is autoclave-cured under heat and pressure, offers a more consistent weave, a controlled resin ratio, and is lighter and stronger. The production method widely chosen in motorsport.

Installation Notes

Installation takes 15-20 minutes and is DIY-capable:

1. Hold the mirror housing firmly from the inner edge outward.
2. Locate the three clip points on the stock cap; use a small plastic pry tool to release them.
3. Align the carbon cap to the clip points and press firmly to snap on.
4. Verify all three clips have engaged (audible click).
5. Repeat for the opposite side.

Care & Maintenance

Wash with pH-neutral shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer at least 30 cm from the carbon surface.

FAQ

Compatible with the CLA C117 (2013-2019)?
No. C117 and C118 have different mirror housing designs.

Are left and right sold separately?
No, left + right are sold as a pair.

Compatible with all CLA C118 trims?
Yes. CLA200, CLA220, CLA250, CLA35, CLA45, and CLA45 S share the same mirror housing.

Compatible with the W177/V177 A-class?
Geometrically very similar, but minor differences may exist. A separate A-class product is available. Contact support before ordering.

Will it affect mirror electronic functions?
No. The carbon cap replaces only the outer shell; folding, heating, and adjustment functions work as stock.

Will rain damage dry carbon?
No. Autoclave-cured carbon is waterproof.

Shipping time?
In-stock items ship within 1-3 business days. Parts sourced to order are delivered within 30 days of the order date at the latest.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world. Our catalog includes Mercedes AMG carbon parts, CLA C118 carbon mirror caps, BMW M3 carbon mirror caps, Audi RS carbon mirror caps, and many more high-quality components.