Mercedes-Benz AMG G63 W463 (2018+) Prepreg Dry Carbon Fiber Front Lip

Engineered for Mercedes-Benz AMG G63 W463 (2018+ facelift) owners, this Prepreg Dry Carbon Fiber Front Lip adds an aggressive splitter character to the upright G-Wagen front fascia. Manufactured in Europe and quality-controlled by BYC Performance, this lip bonds and bolts to the OEM AMG front bumper's lower edge.

If your G63 AMG build needs a sharp carbon line on the iconic upright front face, this dry carbon front lip is the answer. Autoclave-cured prepreg construction resists stone chips, with light weight and long life.

Key Features

• Prepreg (Dry) Carbon Technology: Autoclave-cured under high heat and pressure; a more consistent weave.
• Aggressive Splitter Line: Lowers the upright G63 front for a performance-focused stance.
• 2x2 Twill Carbon Weave: Authentic pattern under UV-protective clear coat.
• Race-Grade Strength: Very high strength for its weight — resists stone chips.
• 3M VHB Tape + Bolt Mounting: Dual-secure fixation.
• UV & Chemical Protection: Long-life clear coat.
• Direct OEM Fit: Matches the W463 2018+ AMG front bumper lower edge.

Prepreg (Dry) Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts use wet lay-up. Prepreg (dry) carbon:

• Autoclave-cured → a more consistent weave
• Controlled resin ratio → lighter, stronger
• The production method widely chosen in motorsport
• Minimal UV fading

Vehicle Fitment

This G63 W463 carbon front lip fits:

• Mercedes-Benz G63 AMG W463 (2018-2024+) — M177 4.0L V8 biturbo, 577-585 hp
• Mercedes-Benz G500 / G550 W463 (2018+) — models equipped with AMG front bumper package

Important notes:

• NOT compatible with pre-2018 G-Wagen (W463A).
• Will not fit G-Wagen models with the standard (non-AMG) front bumper — AMG bumper package only.
• Approach angle is reduced when the lip is installed; serious off-road use requires careful planning.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

1. Clean and dry the lower bumper surface with isopropyl alcohol.
2. Test-fit the lip.
3. Peel the 3M protective film progressively and press the lip onto the bumper edge.
4. Secure bolts at marked points on the bumper inner surface to the manufacturer's recommended torque.
5. Avoid car washes for 24 hours.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure-washer nozzle 30 cm away.

FAQ

Fits pre-2018 G-Wagen?
No. Pre-2018 bumper geometry is completely different.

Fits standard (non-AMG) G500?
No. The lip fits only the AMG front bumper package — verify your bumper trim.

Will the lip be damaged off-road?
Approach angle is reduced with the lip. Light off-road is fine, but aggressive ramps/climbs risk contact.

Are both 3M tape and bolts necessary?
Both are recommended for maximum security against aero loads.

Can it be painted?
Yes, but carbon weave will be hidden.

Shipping?
In-stock items ship within 1-3 business days via partner couriers.

Warranty?
12-month BYC manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers. Our catalog includes G63 AMG carbon front lips, Mercedes AMG carbon parts, BMW M carbon diffusers, Audi R8 carbon parts, and many more.