Mercedes-Benz AMG GT C190 (2014-2020) Prepreg Dry Carbon Fiber Vented Front Fender

Designed for Mercedes-AMG GT C190 2-door sports car (2014-2020) owners, this Prepreg Dry Carbon Fiber Vented Front Fender brings the aggressive front-quarter design language of the GT R and Black Series to standard GT trims — extracting hot, high-pressure air from behind the front wheel through side vents and giving the car a GT R DNA aero look. Manufactured in Europe to factory-spec tolerances and quality-controlled by BYC Performance, this C190 carbon vented fender bolts directly to OEM mounting points.

If you're building a serious AMG GT C190 tuning project and need a part that exceeds the factory aluminum fender in both weight savings and aero, this dry carbon vented fender is built for you. Autoclave-cured prepreg carbon fiber delivers a noticeably lighter panel than the stock aluminum fender. Integrated vents extract the high-pressure hot air pocket behind the front wheel — improving front-end aero efficiency for the M178 4.0L V8 biturbo (462-577 hp, Black Series 720 hp).

Key Features

• Prepreg (Dry) Carbon Technology: Autoclave-cured under high heat and pressure; a more consistent weave.
• Functional Air Vents: Extract high-pressure hot air from behind the front wheel; reduce front-end lift.
• GT R / Black Series Aesthetic: Brings the aggressive side-fender language of the GT R and Black Series to standard AMG GT trims.
• Significant Weight Reduction: Noticeably lighter than the stock aluminum fender — improved front-axle weight distribution.
• Direct OEM Fit: Bolts directly to Mercedes-AMG GT C190 (2014-2020) front fender mounting points, no cutting.
• 2x2 Twill Carbon Weave: Authentic carbon look under high-gloss UV-protective resin.
• Left + Right Pair: Left (driver) + right (passenger) pair.
• UV & Chemical Protection: Long-life exterior protection.

Prepreg (Dry) Carbon vs. Wet Carbon

Prepreg carbon is autoclave-cured under heat and pressure, a more consistent weave, a controlled resin ratio. The production method widely chosen in motorsport; noticeably lighter and stronger than wet-lay parts.

Vehicle Fitment

This AMG GT C190 carbon vented fender fits the following models:

• Mercedes-AMG GT C190 Coupé (2014-2020) — M178 4.0L V8 biturbo
• Mercedes-AMG GT S C190 (510 hp)
• Mercedes-AMG GT C C190 (550 hp)
• Mercedes-AMG GT R C190 (577 hp) — fitment confirmed
• Mercedes-AMG GT R Pro C190 (577 hp, 2019)
• Mercedes-AMG GT Roadster C190 (2017-2020) — convertible
• Mercedes-AMG GT Black Series C190 (720 hp, 2020 limited) — please confirm before ordering due to Black Series' unique wide-arch fender

Important notes:

• This product is NOT compatible with the 4-door AMG GT X290 (GT 4-Türer / GT 63). C190 sports car and X290 4-door are different chassis with different fender geometry.
• The Black Series wide-arch fender profile differs from the standard GT C190; contact our support team before ordering for Black Series.
• Vents are functional and include internal deflectors to prevent water ingress.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Kit Includes: Left + Right fenders
• Origin: Europe

Installation Notes

Professional installation required:

1. Raise the vehicle and remove the front wheels.
2. Remove the inner fender liners and bolts.
3. Loosen the stock aluminum fender bolts (door side edge, front bumper join, engine bay join).
4. With a helper, remove the stock fender.
5. Test-fit the carbon fender for alignment.
6. Loosely bolt in, check door/hood/bumper gaps.
7. Torque bolts to the manufacturer's recommended torque.
8. Reinstall liners and wheels.
9. Repeat for the opposite side.

Care & Maintenance

Wash with pH-neutral shampoo. Clean vent edges with a soft brush. After track use, wipe heat marks with a carbon-safe cleaner. Apply carbon sealant every 6 months.

FAQ

Compatible with the AMG GT 4-Door X290?
No. C190 sports car and X290 4-door are different chassis with different fender geometry. A separate carbon kit series for X290 is available in our catalog.

Compatible with GT R and Black Series?
GT R fitment is confirmed. The Black Series has a different wide-arch fender profile; contact our support team before ordering.

Compatible with the Roadster (convertible)?
Yes. The AMG GT Roadster (2017-2020) and Coupé share the same front fender.

Are the vents functional?
Yes. They extract the high-pressure hot air pocket from behind the front wheel and reduce front-end lift at speed.

How much lighter than stock?
Noticeably lighter. Reduced front-axle weight improves front downforce and turn-in response.

Is there a fender difference between standard GT (462 hp) and GT C / GT R?
No. Standard GT, GT S, and GT C share the same fender. The GT R may have a slightly wider profile — confirm with support before ordering.

Will rain damage dry carbon?
No. Autoclave-cured carbon is waterproof. Internal deflectors prevent rain ingress through the vents.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers. Our catalog includes Mercedes AMG carbon parts, AMG GT C190 carbon fenders, C63 W205 carbon fenders, BMW M3 carbon fenders, and many more high-quality components.