Porsche 718 Cayman/Boxster (982, 2016+) Prepreg Dry Carbon Fiber Front Air Canard

Engineered for Porsche 718 Cayman/Boxster (982 chassis, 2016+) owners, this Prepreg Dry Carbon Fiber Front Air Canard set adds aggressive motorsport-style dive planes to the front bumper corners and contributes to front-axle downforce at speed. Manufactured in Europe and quality-controlled by BYC Performance, this Porsche 718 carbon canard set bonds to OEM bumper surfaces with 3M double-sided tape.

If you are building a serious Porsche 718 tuning project and want race aesthetics with functional front downforce, this dry carbon front air canard is built for you. Canards (dive planes) are critical aero elements used in motorsport to manage turbulence and increase front-axle grip. Autoclave-cured prepreg carbon is noticeably lighter, superior in strength, and excellent in UV resistance.

Key Features

• Prepreg (Dry) Carbon Technology: Autoclave-cured under high heat and pressure; homogeneous resin, a more consistent weave.
• Aerodynamic Benefit: Front bumper canards add front-axle downforce and manage corner turbulence.
• Motorsport Styling: Aggressive dive-plane profile inspired by GT3/GT4 RS race cars.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under a high-gloss UV-protective clear coat.
• Adhesive Mounting: 3M double-sided tape bonds directly to OEM bumper - no drilling or cutting.
• Pair Set: Ships as left and right canard pair; symmetrical design.
• UV and Chemical Protection: Long-life clear coat protects against fading, cracking, and stone chips.

Prepreg (Dry) Carbon vs. Wet Carbon - Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature - leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure - a more consistent weave
• A controlled resin ratio - lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Porsche 718 front air canard fits the following 982 chassis (2016+) models:

• Porsche 718 Cayman (2016+) - 2.0L flat-4 turbo, 300 hp
• Porsche 718 Cayman S (2016+) - 2.5L flat-4 turbo, 350 hp
• Porsche 718 Cayman GTS 2.5T / GTS 4.0 (2018+ / 2020+)
• Porsche 718 Cayman T (2019+)
• Porsche 718 Boxster (2016+) - 2.0L flat-4 turbo, 300 hp
• Porsche 718 Boxster S (2016+) - 2.5L flat-4 turbo, 350 hp
• Porsche 718 Boxster GTS 2.5T / GTS 4.0 (2018+ / 2020+)
• Porsche 718 Spyder / Boxster Spyder 4.0 (2019+) - verify front bumper trim before ordering
• Porsche 718 Cayman GT4 4.0 (2020+) - verify GT4 front bumper canard lines

Important notes:

• NOT compatible with the previous-generation 981 Cayman/Boxster (2013-2016).
• NOT compatible with the 718 Cayman GT4 RS (2022+), which ships with a dedicated front aero package and factory canards.
• Canards are visual-functional parts; downforce gains become meaningful at track speeds (above 160 km/h).

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

Installing the Porsche 718 carbon canards uses 3M double-sided adhesive:

1. Clean the front bumper corner area with isopropyl alcohol; remove wax/silicone residue.
2. Mark canard position with a dry test fit (do not remove the tape liner yet).
3. Remove the 3M liner and press the canard firmly into place (at least 30 seconds of pressure).
4. Do not wash the vehicle for 24 hours so the adhesive can reach full strength.
5. Symmetrical alignment is critical - using a ruler is recommended.

Care and Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer away from canard edges to prevent 3M tape separation.

FAQ

Do canards really add downforce?
Yes, but functional gains become meaningful at track speeds (above 160 km/h). In city use they primarily provide visual impact.

Compatible with both Cayman and Boxster?
Yes. The 982-generation Cayman and Boxster share identical front bumper corner geometry.

Does this fit the 981?
No. The 981 (2013-2016) has different front bumper lines.

Does this fit the GT4 RS?
No. The 718 Cayman GT4 RS (2022+) ships with a dedicated front aero package and factory canards.

Does this fit the Spyder or GT4?
4.0-engined Spyder and GT4 use the standard 982 front bumper, but the GT4 may ship with a specific front splitter - verify before ordering.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof. The 3M tape is also weather-resistant.

Shipping time?
In-stock items ship within 1-3 business days.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes Porsche carbon parts, Porsche 911 carbon canards, Audi R8 carbon diffusers, BMW M3 carbon spoilers, and many more high-quality carbon components. All parts undergo strict quality control.