Porsche 718 Cayman GT4 RS (982, 2022+) Prepreg Dry Carbon Fiber Front Lip

Engineered for Porsche 718 Cayman GT4 RS (982 chassis, 2022+) owners, this Prepreg Dry Carbon Fiber Front Lip brings race-grade carbon to the front splitter line of the 500 hp 4.0L flat-6 naturally-aspirated GT4 RS. Manufactured in Europe and quality-controlled by BYC Performance, this Porsche GT4 RS carbon front lip bolts directly to GT4 RS-specific front bumper lower-edge mounting points.

The 718 Cayman GT4 RS produces 500 hp from a 4.0L flat-6 NA engine inherited from the 991.2 GT3; it is the most aggressive Cayman-bodied Porsche, sold only as a Coupe. This dry carbon front lip completes the GT4 RS motorsport front aero package and adds front-axle downforce. Noticeably lighter than OEM plastic, far stronger, and outstandingly UV-resistant.

Key Features

• Prepreg (Dry) Carbon Technology: Autoclave-cured under high heat and pressure; homogeneous resin, a more consistent weave.
• GT4 RS-Specific Geometry: Splitter profile designed specifically for the GT4 RS motorsport front bumper lines.
• Motorsport DNA: Aggressive splitter line aligned with the 4.0L flat-6 (derived from 991.2 GT3) track character.
• Aerodynamic Benefit: Adds front-axle downforce; meaningful gains at track speeds.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under a high-gloss UV-protective clear coat.
• Direct OEM Fit: Plug and play installation on the 718 Cayman GT4 RS front bumper lower-edge mounting points.
• UV and Chemical Protection: Long-life clear coat protects against fading, cracking, and road tar.

Prepreg (Dry) Carbon vs. Wet Carbon - Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature - leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure - a more consistent weave
• A controlled resin ratio - lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Porsche 718 GT4 RS front lip fits ONLY the following model:

• Porsche 718 Cayman GT4 RS (2022+) - 4.0L flat-6 NA, 500 hp, Coupe only

Important notes:

• This product is compatible ONLY with the 718 Cayman GT4 RS. It is NOT compatible with standard 718 Cayman / Cayman S / Cayman GTS / Cayman T / Cayman GT4 / Cayman GTS 4.0 or any Boxster trim. The GT4 RS front bumper has motorsport-specific widened aero lines.
• Standard 718 Cayman/Boxster owners can review our standard Cayman/Boxster front lip versions (classic and V2) in our catalog.
• NOT compatible with the previous-generation 981 Cayman/Boxster (2013-2016).
• No Boxster GT4 RS exists from the manufacturer; this part is for the Cayman GT4 RS Coupe only.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

Installing the Porsche GT4 RS carbon front lip uses bolts and 3M double-sided tape under the factory bumper. Professional installation is recommended:

1. Clean the front bumper lower edge with isopropyl alcohol.
2. Test-fit the lip; centering is critical.
3. Remove the 3M liners and press firmly.
4. If hardware is supplied, torque the lower mounting points to the manufacturer's recommended torque.
5. Do not wash the vehicle for 24 hours and avoid hard runs.

Care and Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer away from lip edges. Inspect for stone and tar impacts after track use.

FAQ

Does this fit the standard 718 Cayman?
No. This part only fits the 718 Cayman GT4 RS (2022+) front bumper geometry. Separate front lip versions (classic and V2) for standard Cayman/Boxster are available in our catalog.

Does this fit the Cayman GT4 (4.0, 2020+)?
No. The standard Cayman GT4 and GT4 RS front bumpers differ. The GT4 RS front bumper has motorsport-specific widened aero.

Is there a Boxster Spyder or Boxster GT4 RS?
No Boxster GT4 RS exists. This part is only for the Cayman GT4 RS Coupe.

Does this fit the 981?
No. The 981 (2013-2016) and 982 have different front bumper lines.

Is it track-rated?
Yes. Autoclave-cured prepreg carbon withstands track temperatures and vibration; designed with the GT4 RS track usage profile in mind.

Will it vibrate at high speed?
No. When mounted correctly with 3M tape and bolts, it stays stable at highway/track speeds.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof.

Shipping time?
In-stock items ship within 1-3 business days; long-part packaging is handled with extra care.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes Porsche carbon parts, Porsche 911 GT3 RS carbon front lips, Audi R8 carbon diffusers, BMW M3 carbon spoilers, and many more high-quality carbon components. All parts undergo strict quality control.