Porsche Cayenne 9YA (2018+) Prepreg Dry Carbon Fiber V2 Front Lip

Engineered for Porsche Cayenne 9YA (E3 / PO536, 2018+) owners, this Prepreg Dry Carbon Fiber V2 Front Lip brings an aggressive V-cut geometry to the lower front bumper, adding a motorsport-inspired finish wall and pushing the front fascia toward a track aesthetic. Manufactured in Europe and quality-controlled by BYC Performance, this Porsche Cayenne V2 carbon front lip bolts directly to the OEM front bumper lower line — no cutting, no drilling.

If you are building a Porsche Cayenne tuning project and want a part that surpasses the plain factory bumper bottom and emphasizes the front aerodynamically, this dry carbon V2 front lip is built for you. Autoclave-cured prepreg carbon is noticeably lighter than plastic alternatives and resists stone chips and road chemicals. The V-cut geometry, inspired by the 4.0L V8 biturbo Turbo GT (631 hp), dramatically deepens the front fascia on both 9YA SUV and Coupe bodies.

Key Features

• Prepreg Dry Carbon Technology: Autoclave-cured under high heat and pressure with homogeneous resin distribution and a more consistent weave.
• Aggressive V-Cut Geometry: V-shaped deepening lip profile; track-inspired look with front downforce contribution.
• Aerodynamic Function: Directs airflow under the front bumper for improved high-speed stability.
• Race-Grade Strength: Carbon fiber offers very high strength for its weight; resists stone strikes and speed-bump scrapes.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under high-gloss UV-protective clear coat.
• Direct OEM Fit: Plug-and-play on Cayenne 9YA SUV and Coupe front bumper lower line using clips + bolts + 3M VHB tape.
• UV and Chemical Protection: Clear coat resists fading, cracking, and road chemicals.

Prepreg Dry Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon is wet lay-up with hand-applied resin cured at room temperature — leaving voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Porsche Cayenne V2 front lip fits the following models:

• Porsche Cayenne 9YA SUV (2018, 2019, 2020, 2021, 2022, 2023, 2024) — all trims
• Porsche Cayenne 9YA Coupe (2019, 2020, 2021, 2022, 2023, 2024) — all trims
• Cayenne S 3.0L V6 turbo (340 / 440 hp)
• Cayenne GTS 4.0L V8 biturbo (460 hp)
• Cayenne Turbo 4.0L V8 biturbo (550 hp)
• Cayenne Turbo GT Coupe 4.0L V8 biturbo (631 hp)
• Cayenne E-Hybrid / Turbo S E-Hybrid

Important notes:

• NOT compatible with previous-generation Porsche Cayenne 9PA (2010-2018). Different front bumper geometry.
• The V2 has a deeper, more aggressive geometry than the standard V1 design; OEM+ alternative lip versions are available in our catalog for those who prefer a subtler look.
• Users with very low ride height (air suspension lowest setting, non-air-suspension lowering springs) should be cautious on speed bumps and steep ramps.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

Mounts with clip + bolt + 3M VHB tape combination. Professional installation recommended:

1. Clean lower front bumper surface with isopropyl alcohol.
2. Remove any existing OEM splitter / lip clips.
3. Dry-fit the carbon lip for alignment.
4. Activate 3M VHB tape at 23-25 C ambient; torque supplied bolts to the manufacturer's recommended torque.
5. Press firmly at clip points; avoid water contact for 24 hours.

Care and Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer at least 30 cm away.

FAQ

Does this fit the 9PA (2010-2018)?
No. The 9PA is the previous generation with different front bumper geometry.

Compatible with both SUV and Coupe?
Yes. Cayenne 9YA SUV and Coupe share the same front bumper line; this V2 lip fits both bodies.

What is the difference between V1 and V2?
The V2 has a deeper V-cut profile — more aggressive look and a marginal aerodynamic gain. For an OEM+ subtle look, see other lip versions in our catalog.

Does it have an aerodynamic function?
Yes, it directs airflow under the front bumper for marginally improved high-speed stability; the main purpose is aesthetic.

Will it get damaged on speed bumps?
At low ride heights, take steep transitions carefully; carbon fiber is durable but contact is not recommended.

Will rain damage dry carbon?
No. Autoclave-cured prepreg carbon is fully waterproof.

Shipping time?
In-stock items ship within 1-3 business days.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers. Our catalog includes Porsche Cayenne carbon parts, Porsche carbon spoilers, Audi RS carbon front lips, BMW M carbon parts, and more.