Porsche Panamera 971 (2017+) Prepreg Dry Carbon Fiber Front Air Duct

Engineered for Porsche Panamera 971 (G2, 2017+) owners, this Prepreg Dry Carbon Fiber Front Air Duct set converts the factory front-bumper intake surrounds into motorsport-grade carbon detailing. Manufactured in Europe and quality-controlled by BYC Performance, this Porsche Panamera carbon front air duct mounts directly to OEM points — no cutting, no drilling, no painting required.

If you are building a Porsche Panamera tuning project and want a subtle but unmistakable carbon accent on the front bumper, this dry carbon front air duct set is built for you. Autoclave-cured prepreg carbon fiber is noticeably lighter than wet-lay carbon parts, offers very high strength for its weight, and resists long-term UV fading. Visually reinforces the GT character of the 971's 2.9L V6 biturbo, 4.0L V8 biturbo, and Turbo S E-Hybrid (700 hp combined) lineup.

Key Features

• Prepreg (Dry) Carbon Technology: Pre-impregnated carbon plies cured in an autoclave under high heat and pressure for a more consistent weave and balanced resin distribution.
• Left + Right Pair: Shipped as a driver-side and passenger-side set.
• OEM Airflow Preserved: Factory air channel geometry is preserved; brake and radiator cooling airflow remains unrestricted.
• 2x2 Twill Carbon Weave: Authentic carbon fiber pattern under a high-gloss UV-protective clear coat.
• Lightweight: Offers a worthwhile weight saving over the painted plastic OEM part.
• 3M Tape + Clip Fit: Mounts via 3M VHB tape and OEM clips.
• UV & Chemical Protection: Long-life clear coat protects against fading, cracking, bug spatter, and road tar.

Prepreg (Dry) Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger for its weight
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Porsche Panamera 971 carbon front air duct fits the following models:

• Porsche Panamera 971 Sedan (2017-2024) — all trims
• Porsche Panamera Sport Turismo 971 (2018-2024) — all trims
• Porsche Panamera 4 / 4S / GTS / Turbo / Turbo S 971
• Porsche Panamera Turbo S E-Hybrid 971 (700 hp combined)
• Porsche Panamera 4 E-Hybrid / 4S E-Hybrid 971
• Primarily designed for the pre-facelift (2017-2020) front bumper — post-facelift (2021+) bumper geometry differs; please confirm with a pre-order photo

Important notes:

• This product is NOT compatible with the previous-generation Porsche Panamera 970 (2009-2016). The 970 and 971 have different front bumper geometry.
• Best fit with vehicles equipped with the factory SportDesign or Turbo package front bumper.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Set Contents: 2 pieces (left + right)
• Origin: Europe

Installation Notes

Installing the Porsche Panamera carbon front air duct requires care; professional installation is recommended:

1. Clean the front bumper intake surfaces with isopropyl alcohol.
2. Locate OEM clips and test-fit the parts.
3. Peel the 3M VHB liner and place the part.
4. Press the clips until fully seated.
5. Apply even pressure for 24 hours using foam pads.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface.

FAQ

Does this fit the Porsche Panamera 970 (2009-2016)?
No. The 970 and 971 have different front bumper geometry.

Compatible with Sport Turismo (wagon)?
Yes. The Panamera 971 Sedan and Sport Turismo share the same front bumper.

Is the pre-facelift and post-facelift Panamera 971 front bumper the same?
No. The 2020 facelift revised front bumper details. This set is primarily designed for the pre-facelift (2017-2020) bumper; post-facelift owners should share a pre-order photo.

Does it restrict factory brake cooling airflow?
No. The factory air channel geometry is preserved; cooling airflow is not affected.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof and weather-resistant.

Shipping time?
In-stock items ship within 1-3 business days. International shipping available.

Warranty?
BYC Performance offers a 12-month manufacturer warranty on this product.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes Porsche carbon parts, Audi RS carbon diffusers, BMW M carbon diffusers, Porsche 911 carbon spoilers, and many more high-quality carbon components. All parts undergo strict quality control.