Audi C8 (A6/S6/RS6 + A7/S7/RS7, 2017-2024) Prepreg Dry Carbon Fiber Mirror Caps

Engineered for all Audi C8 A6, S6, RS6, A7, S7, and RS7 owners, this Prepreg (Dry) Carbon Fiber Mirror Cap set replaces factory-painted or body-colored plastic caps with a premium carbon finish. The C8 mirror housing geometry is identical between A6 family and A7 family — including RS6 and RS7. Manufactured in Europe and quality-controlled by BYC Performance, this Audi C8 carbon mirror cap set clips onto OEM mounting points with no modification required.

If you're building an Audi RS6 tuning, RS7 modification, S6/S7 carbon trim, or A6/A7 visual upgrade project, a single SKU covers 6 different model lines and 3 body styles (Sedan / Avant / Sportback). Autoclave-cured prepreg carbon is noticeably lighter, more durable, and more UV-resistant than OEM plastic.

Key Features

• Prepreg (Dry) Carbon Technology: Autoclave-cured under high heat and pressure for a more consistent weave.
• Full C8 Lineup: A6, S6, RS6, A7, S7, RS7 — Sedan + Avant + Sportback — single SKU.
• Lightweight: Noticeably lighter than OEM plastic caps.
• High Strength: Carbon fiber offers very high strength for its weight.
• 2x2 Twill Carbon Weave: Genuine carbon pattern under high-gloss UV-protective clear coat.
• Direct OEM Fit: Plug & play installation on OEM mirror cap clip points.
• UV & Wash Durability: Resistant to fading, automatic car wash brushes, and icing.

Prepreg (Dry) Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts use wet lay-up, with hand-applied resin and room-temp cure, leaving voids. Prepreg (dry) carbon:

• Autoclave-cured under heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Audi C8 carbon mirror cap set fits ALL of the following:

• Audi A6 Sedan C8 (2018-2024) — all petrol/diesel variants
• Audi A6 Avant C8 (2018-2024) — all variants
• Audi S6 Sedan C8 (2019-2024) — 2.9 TFSI V6 biturbo / 3.0 TDI MHEV
• Audi S6 Avant C8 (2019-2024) — same powertrains
• Audi RS6 Avant C8 (2019-2024) — 4.0 TFSI V8 biturbo MHEV (591/621 hp Performance)
• Audi A7 Sportback C8 (2017-2024) — all petrol/diesel variants
• Audi S7 Sportback C8 (2019-2024) — 2.9 TFSI V6 biturbo / 3.0 TDI MHEV
• Audi RS7 Sportback C8 (2019-2024) — 4.0 TFSI V8 biturbo MHEV (591/621 hp Performance)

Important notes:

• This product is NOT compatible with the previous-generation Audi C7 A6/S6/RS6/A7/S7/RS7 (2010-2018). C7 mirror caps use a different clip and form geometry.
• RS6/RS7 mirror cap geometry is identical to non-RS C8 — no separate RS version needed.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss UV-Protective Clear Resin
• Color: Natural carbon weave black
• Origin: Europe
• Set Contents: Left + right mirror cap (pair)

Installation Notes

Mirror cap replacement can be done without service tooling. Professional installation still recommended:

1. Fold the mirror to access internal cap clips.
2. Remove OEM cap by gently pulling forward off the clip points.
3. Test-fit the carbon cap.
4. Push the clips firmly until they click into place.
5. Repeat for the opposite mirror and verify symmetry.

Care & Maintenance

Wash with pH-neutral car shampoo, apply carbon-safe sealant every 6 months. Compatible with brush car washes, though hand washing is recommended for longevity.

FAQ

Compatible with RS6 and RS7?
Yes. C8 A6/S6/RS6 and A7/S7/RS7 share identical mirror housing geometry — single SKU covers all 6 model lines.

Compatible with Sedan, Avant, and Sportback?
Yes. All three C8 body styles share the same mirror cap geometry.

Does this fit the previous-generation C7 (2010-2018)?
No. C7 and C8 mirror cap clip and form geometry differ.

Automatic car wash safe?
Yes. Autoclave-cured prepreg carbon and UV resin handle brush washes, though hand washing is preferred for longevity.

Do I need to permanently remove OEM caps?
Yes — OEM caps clip off and the carbon caps clip on. You can save the OEM caps for resale if desired.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. 1-2 day delivery across Turkey.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers. Our catalog includes Audi RS carbon mirror caps, Audi C8 carbon parts, BMW M carbon mirrors, Porsche carbon trim, and many more, all under strict QC.