BMW M2 F87 Prepreg Dry Carbon Fiber Front Bumper

Engineered for BMW M2 F87 owners who want a complete front-end transformation, this Prepreg Dry Carbon Fiber Front Bumper replaces the factory bumper with a motorsport-grade carbon unit that optimizes airflow and brake cooling. Manufactured in Europe and quality-controlled by BYC Performance, this BMW M2 F87 carbon front bumper bolts directly to OEM mounting points — a true direct replacement for the factory plastic bumper.

If your BMW M2 F87 tuning project demands a complete bumper change rather than just a lip, this dry carbon front bumper is the answer. Engineered for both the N55-powered M2 Coupé (370 hp) and the S55-powered M2 Competition / CS (410-444 hp), it is noticeably lighter than wet-lay carbon alternatives and offers very high strength for its weight.

Key Features

• Complete Bumper Replacement: Direct replacement for the OEM front bumper; integrated front lip in one piece.
• Enlarged Air Inlets: Improved brake and intercooler cooling through expanded inlet geometry.
• Prepreg Dry Carbon Technology: Autoclave-cured under high heat and pressure for a consistent weave.
• OEM Sensor & Camera Compatibility: Parking sensor, front camera, and fog light cutouts preserved; sensors transfer over.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under a high-gloss UV-protective clear coat.
• License Plate Ready: Standard EU plate mounting integrated.
• Direct OEM Fit: Bolts to factory F87 front bumper mounting points; no cutting or drilling.

Prepreg Dry Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg dry carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → noticeably lighter with very high strength for its weight
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This BMW M2 F87 carbon front bumper fits the following models perfectly:

• BMW M2 Coupé F87 (2016, 2017, 2018) — N55 engine (~370 hp)
• BMW M2 Competition F87 (2018, 2019, 2020, 2021) — S55 engine (~410 hp)
• BMW M2 CS F87 (2020, 2021 — limited edition) — S55 engine (~444 hp)

NOTE: This front bumper is NOT compatible with the new-generation BMW M2 G87 (2023+). G87 uses different chassis geometry; G87 owners should contact BYC for front-bumper carbon options.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Includes: Complete front bumper (integrated front lip)
• Origin: Europe

Installation Notes

Installing the BMW M2 F87 carbon front bumper requires complete removal of the OEM bumper. Sensor and camera transfer makes professional installation mandatory:

1. Raise the vehicle; remove undertray and lower headlight screws.
2. Disconnect parking sensor, front camera, fog light, and temperature sensor harnesses.
3. Loosen inner-fender screws and remove the OEM bumper.
4. Transfer sensors, fog lights, and camera to the new carbon bumper.
5. Reinstall bumper reinforcement bar and foam absorber.
6. Align the carbon bumper and torque all mounting points.
7. Test parking sensor calibration and front camera alignment.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer at least 30 cm from surface. Avoid spraying directly into parking sensor housings.

FAQ

Do OEM parking sensors and front camera fit this bumper?
Yes. Sensor, front camera, and fog light cutouts are in OEM positions; after transfer, all functions operate normally.

Does this fit the BMW M2 G87 (2023+)?
No. G87 uses different chassis geometry; G87 owners should contact BYC for front-bumper carbon options.

Compatible with both M2 base (N55) and M2 Competition (S55)?
Yes. This bumper fits all F87 variants (N55 Coupé, S55 Competition, S55 CS). F87 front-end geometry is consistent across trims.

Can it be painted?
Yes. The bumper can be painted; alternatively, the natural carbon weave can be left exposed.

Shipping time?
In-stock items ship within 1-3 business days via our multi-carrier options. International shipping available.

Warranty?
BYC Performance offers a 12-month warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes BMW M2 carbon parts, BMW M3 carbon diffusers, Audi RS carbon hoods, Porsche carbon spoilers, and many more high-quality carbon components. All parts undergo strict quality control.