BMW M2 F87 | Prepreg Dry Carbon Fiber Front Canards

BMW M2 F87 Prepreg Dry Carbon Fiber Front Canards

Engineered for BMW M2 F87 owners who want sharp track-day character at the front, this Prepreg Dry Carbon Fiber Front Canard Set adds aggressive aero fins to the front bumper that generate measurable downforce at speed. Imported from leading manufacturers around the world and quality-controlled by BYC Performance, this BMW M2 F87 front canard set mounts directly to the OEM bumper side surface.

If you're building a serious BMW M2 F87 tuning project and want a part that completes the front fascia and adds functional aero, this dry carbon canard set is built for you. The canards redirect airflow into the front wheel arch, manage wheel-wake turbulence, and create downforce over the front axle. Supports high-speed front-end stability for both the N55-powered M2 (370 hp) and the S55-powered M2 Competition / CS (410-444 hp).

Key Features

• Prepreg Dry Carbon Technology: Pre-impregnated carbon plies cured in an autoclave under high heat and pressure for a consistent weave.
• Left + Right Set: Driver and passenger side included; no need to purchase separately.
• Aerodynamic Function: Redirects airflow into the front wheel arch and generates front-axle downforce at speed.
• Race-Track Aesthetic: Sharp canard lines bring motorsport character to the front fascia.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under a high-gloss UV-protective clear coat.
• OEM Bumper Compatible: Mounts to the OEM M2 F87 front bumper with 3M VHB tape and a template; drilling is optional.
• UV & Chemical Protection: Long-life clear coat resists fading, cracking, and stone chips.

Prepreg Dry Carbon vs. Wet Carbon: Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature, leaving air voids and inconsistent weight. Prepreg dry carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → noticeably lighter with very high strength for its weight
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Installation Notes

Installing the BMW M2 F87 front canards requires precise alignment. Steps:

1. Degrease the front bumper side surface with isopropyl alcohol.
2. Use a template to align the canard symmetrically on each side of the bumper.
3. Remove the 3M VHB tape liner and press the canard firmly into place.
4. Optional small side screws can be added for extra security.
5. Do not wash the vehicle for 24 hours so the adhesive can fully cure.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface.

FAQ

Does this set include both left and right canards?
Yes. The set contains 2 canards: driver and passenger side.

Does this fit the BMW M2 G87 (2023+)?
No. F87 and G87 use different front bumper geometry.

Compatible with both M2 base (N55) and M2 Competition (S55)?
Yes. Front bumper side profile is consistent across all F87 trims.

Does it require drilling?
No. Standard installation uses 3M VHB tape; optional screws can be added for extra security.

Is it car-wash safe?
Yes, after the initial 24-hour cure. Keep pressure washer nozzle at a safe distance.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world and supplying them to the Turkish market. Our catalog includes BMW M2 carbon parts, BMW M3 carbon diffusers, Audi RS carbon hoods, Porsche carbon spoilers, and many more high-quality carbon components. All parts undergo strict quality control.