BMW M2 F87 Prepreg Dry Carbon Fiber MP Trunk Lid

Engineered for BMW M2 F87 owners who want a clean, M Performance-styled rear, this Prepreg Dry Carbon Fiber MP Trunk Lid brings a subtle yet aggressive spoiler lip to your rear end. Manufactured in Europe and quality-controlled by BYC Performance, this BMW M2 F87 MP trunk lid fits OEM hinge points and the factory latch mechanism perfectly.

If you're building a serious BMW M2 F87 tuning project and want a more restrained alternative to the CSL ducktail — true to the original M Performance aesthetic — this dry carbon MP trunk lid is built for you. It is noticeably lighter than the OEM steel trunk lid, removing meaningful mass from the rear axle. An ideal upgrade for both the N55 (370 hp) and S55 Competition / CS (410-444 hp) variants.

Key Features

• Prepreg Dry Carbon Technology: Pre-impregnated carbon plies cured in an autoclave under high heat and pressure for a more consistent weave.
• MP-Style Integrated Lip Spoiler: A subtle M Performance lip is structurally part of the trunk lid — no glue or bolt-on seam.
• Noticeable Weight Reduction: Noticeably lighter than the OEM steel trunk lid; reduces rear-axle mass.
• OEM Hinge & Latch Compatible: Factory hinge points, latch, brake light, and plate lighting transfer directly.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under a high-gloss UV-protective clear coat.
• Aerodynamic Lip: Generates light rear-axle downforce at speed and visually lowers the rear stance.
• UV & Chemical Protection: Long-life clear coat resists fading, cracking, and road grime.

Prepreg Dry Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg dry carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and more consistent structure
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This BMW M2 F87 MP trunk lid fits the following models perfectly:

• BMW M2 Coupé F87 (2016, 2017, 2018) — N55 engine (~370 hp)
• BMW M2 Competition F87 (2018, 2019, 2020, 2021) — S55 engine (~410 hp)
• BMW M2 CS F87 (2020, 2021 — limited edition) — S55 engine (~444 hp)

NOTE: This trunk lid is NOT compatible with the new-generation BMW M2 G87 (2023+). G87 uses a different chassis and trunk geometry.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Style: MP integrated lip spoiler
• Origin: Europe

Installation Notes

Installing the BMW M2 F87 MP trunk lid requires professional installation. Steps:

1. Remove trunk interior trim and disconnect the latch, brake light, and plate light wiring.
2. Disconnect the trunk gas struts.
3. With a helper, unbolt the trunk lid from its hinges and lift it off.
4. Loosely mount the new MP carbon trunk lid; adjust panel gaps and symmetry.
5. Transfer the latch, brake light, and plate lighting to the new lid.
6. Torque hinge bolts to the manufacturer's recommended torque, reconnect gas struts, and test all functions.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface.

FAQ

What's the difference between MP and CSL trunk lid?
The MP version has a subtle, M Performance-style lip for a cleaner stance. The CSL has a pronounced raised ducktail profile.

Does this fit the BMW M2 G87 (2023+)?
No. F87 and G87 use different trunk and hinge geometry.

Compatible with both M2 base (N55) and M2 Competition (S55)?
Yes. Trunk lid geometry is consistent across all F87 trims.

Are the OEM latch, brake light, and plate lighting reused?
Yes. All electrical and latch hardware transfers from the original trunk.

Can it be painted?
Yes. Exposed carbon is the standard finish; can be painted to match body color if desired.

Warranty?
BYC Performance offers a 12-month manufacturer warranty on this product.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes BMW M2 carbon parts, BMW M3 carbon diffusers, Audi RS carbon hoods, Porsche carbon spoilers, and many more high-quality carbon components.