BMW M2 F87 Prepreg Dry Carbon Fiber MTC Side Skirts

Engineered for BMW M2 F87 owners who want a lower, wider, more aggressive side profile, these Prepreg Dry Carbon Fiber MTC Side Skirts (left + right set) reshape the side of your vehicle with motorsport-inspired styling. Manufactured in Europe and quality-controlled by BYC Performance, this BMW M2 F87 side skirt set mounts directly to the OEM skirt line with no cutting.

If you're building a serious BMW M2 F87 tuning project and want a part that visually drops the ride height and completes the side profile, this dry carbon MTC side skirt set is built for you. MTC (Motorsport Track Concept) styling features sharp, aggressive lines that reduce side-wall turbulence at speed and create a visual rake toward the center of the vehicle. Complements the M Performance / MTC look on both the N55 (370 hp) and S55 Competition / CS (410-444 hp) variants.

Key Features

• Prepreg Dry Carbon Technology: Pre-impregnated carbon plies cured in an autoclave under high heat and pressure for a more consistent weave.
• MTC (Motorsport Track Concept) Style: Sharp, aggressive lines that visually lower and widen the car.
• Left + Right Set: Driver and passenger side included; no need to purchase separately.
• Direct OEM Fit: Mounts under the factory side skirt via clip points and 3M VHB tape; no drilling required.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under a high-gloss UV-protective clear coat.
• Aerodynamic Contribution: Side-wall airflow management reduces underbody turbulence at speed.
• UV & Chemical Protection: Long-life clear coat resists fading, cracking, and road grime.

Prepreg Dry Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg dry carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → noticeably lighter with very high strength for its weight
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This BMW M2 F87 side skirt set fits the following models perfectly:

• BMW M2 Coupé F87 (2016, 2017, 2018) — N55 engine (~370 hp)
• BMW M2 Competition F87 (2018, 2019, 2020, 2021) — S55 engine (~410 hp)
• BMW M2 CS F87 (2020, 2021 — limited edition) — S55 engine (~444 hp)

NOTE: This skirt set is NOT compatible with the new-generation BMW M2 G87 (2023+). G87 uses different chassis geometry.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Set Contents: Left + Right skirt (2 pcs)
• Mounting: Clips + 3M VHB tape
• Origin: Europe

Installation Notes

Installing the BMW M2 F87 side skirts requires careful alignment. Steps:

1. Degrease the OEM skirt surface with isopropyl alcohol.
2. Dry-fit the skirt on the vehicle; ensure it is parallel to door gaps and wheel arches.
3. Seat the clip points into the factory recesses.
4. Remove the 3M VHB tape liner and press the skirt firmly into place.
5. Do not wash the vehicle for 24 hours so the adhesive can fully cure.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface.

FAQ

Does this set include both left and right skirts?
Yes. The set contains 2 skirts — driver and passenger side.

Does this fit the BMW M2 G87 (2023+)?
No. F87 and G87 use different side profile and skirt geometry.

Compatible with both M2 base (N55) and M2 Competition (S55)?
Yes. Side skirt geometry is consistent across all F87 trims.

Does installation require drilling or cutting?
No. Mounting uses factory clip points and 3M VHB tape.

Is it car-wash safe?
Yes, after the initial 24-hour cure. Keep pressure washer nozzle at a safe distance.

Warranty?
BYC Performance offers a 12-month manufacturer warranty on this product.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes BMW M2 carbon parts, BMW M3 carbon diffusers, Audi RS carbon hoods, Porsche carbon spoilers, and many more high-quality carbon components. All parts undergo strict quality control.