BMW M2 G87 | Prepreg Dry Carbon Fiber MP Front Lip

BMW M2 G87 Prepreg Dry Carbon Fiber MP Front Lip

Engineered for BMW M2 G87 owners who want a sharper, aggressive front-end stance, this Prepreg Dry Carbon Fiber MP Front Lip brings M Performance lines to the lower bumper while reducing front-axle lift at high speed. Made to factory-spec tolerances by leading manufacturers around the world and quality-controlled by BYC Performance, this BMW M2 G87 carbon front lip uses OEM bumper clip and bolt locations: no cutting required.

If you're building a serious BMW M2 G87 tuning project and want an MP-style splitter that integrates cleanly with the factory bumper, this dry carbon MP front lip is the right upgrade. Autoclave-cured prepreg construction is noticeably lighter than wet-lay carbon parts and substantially more durable. The 460 hp S58-powered M2 G87 benefits from improved front-end planting at speed.

Key Features

• Prepreg Dry Carbon Technology: Pre-impregnated carbon plies cured in an autoclave under high heat and pressure, for a consistent weave and homogeneous structure.
• MP Style Line: M Performance-inspired sharp-edged splitter profile that flows into the bumper.
• Aerodynamic Benefit: Reduces front-axle lift at speed; improves front-end grip.
• High Strength: Carbon fiber offers very high strength for its weight; resists curbs and speed bumps.
• 2x2 Twill Carbon Weave: Authentic carbon pattern beneath a high-gloss UV-protective clear coat.
• Direct OEM Fit: Plug & play to factory bumper clips and bolt points; no cutting required.
• UV & Chemical Protection: Long-life clear coat resists fading, cracking, and road debris.

Prepreg Dry Carbon vs. Wet Carbon: Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature, leaving air voids and inconsistent weight. Prepreg dry carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Installation Notes

Installing the BMW M2 G87 carbon front lip is owner-installable with careful alignment:

1. Clean the bumper's lower surface with isopropyl alcohol (IPA).
2. Dry-fit the lip to the bumper curve; mark left-right gaps.
3. Peel the pre-applied 3M VHB tape liner.
4. Press the lip into place and secure with supplied bolts on the underside to the manufacturer's recommended torque.
5. Install at an ambient temperature of at least 18°C and do not wash the vehicle for 24 hours.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from the surface. Be cautious of curbs.

FAQ

Will the lip scrape on driveways?
At factory ride height, taking ramps and speed bumps carefully is sufficient. On lowered suspensions, lip clearance is more critical.

Does this lip fit the BMW M2 F87 (2016-2021)?
No. G87 and F87 have different bumper geometry and lip length. A separate carbon lip is available for F87.

Will adaptive headlights or front sensors be affected?
No. The lip attaches to the lower bumper edge and does not affect sensor or adaptive headlight range.

Is it compatible with the S58-powered M2 G87?
Yes, fits all M2 G87 trims (standard, Competition, and the upcoming CS). Lips for M3 G80 / M4 G82 are listed separately.

Is it tape-only or bolted?
Both. The lip is secured with OEM clips, pre-applied 3M VHB tape, and hidden underside bolts.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. International shipping available. Parts sourced to order are delivered within 30 days of the order date at the latest.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world and supplying them to the Turkish market. Our catalog includes BMW M2 carbon parts, BMW M3 carbon diffusers, Audi RS carbon hoods, Porsche carbon spoilers, and many more high-quality carbon components. All parts undergo strict quality control.