BMW M2 G87 Prepreg Dry Carbon Fiber MP Spoiler

Engineered for BMW M2 G87 owners seeking a clean, motorsport-derived rear accent, this Prepreg Dry Carbon Fiber MP Spoiler sharpens the rear identity of your vehicle while contributing a measurable amount of high-speed rear-axle stability. Manufactured in Europe to factory-spec tolerances and quality-controlled by BYC Performance, this BMW M2 G87 carbon spoiler mounts to the trunk lid edge with pre-applied 3M VHB tape — no drilling, no paint removal.

If you're building a BMW M2 G87 tuning project and want a subtle but distinctive MP-style extension on the trunk, this dry carbon MP spoiler is the right choice. Autoclave-cured prepreg construction is noticeably lighter than wet-lay carbon spoilers and far more durable. The S58 engine producing 460 hp in the M2 G87 benefits from any incremental high-speed aero balance gain.

Key Features

• Prepreg Dry Carbon Technology: Pre-impregnated carbon plies cured in an autoclave under high heat and pressure — for a consistent weave and homogeneous structure.
• MP Style Line: M Performance-inspired sharp-edged profile that integrates seamlessly with the trunk lid.
• Aerodynamic Benefit: Slight rear-axle downforce at high speed; improves straight-line stability.
• 3M VHB Tape Mounting: Factory-applied automotive-grade VHB tape; no drilling or paint removal needed.
• 2x2 Twill Carbon Weave: Authentic carbon pattern beneath a high-gloss UV-protective clear coat.
• OEM Line Match: Sits flush along the M2 G87 trunk lid curve; does not interfere with bumper or brake light access.
• UV & Chemical Protection: Long-life clear coat resists fading, cracking, and bug/tar splatter.

Prepreg Dry Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg dry carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This BMW M2 G87 spoiler fits the following models perfectly:

• BMW M2 G87 Coupé (2023, 2024, 2025)
• BMW M2 Competition G87 (S58 engine)
• BMW M2 CS G87 (planned trim)

NOTE: This spoiler is NOT compatible with the previous-generation BMW M2 F87 (2016-2021). F87 has a different trunk lid curve. A separate F87 spoiler is available in our catalog.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Mounting: 3M VHB Tape (pre-applied)
• Origin: Europe

Installation Notes

Installing the BMW M2 G87 carbon spoiler is owner-installable but requires careful alignment:

1. Clean the trunk lid surface with isopropyl alcohol (IPA) and let dry completely.
2. Dry-fit the spoiler to the trunk lid curve; mark center and side gaps.
3. Ensure ambient temperature is at least 18°C for proper tape adhesion.
4. Peel the 3M VHB liner, align the spoiler, and apply firm pressure (at least 30 seconds) along the full contact line.
5. Do not wash the vehicle for 24 hours to allow full adhesion.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from the spoiler edge and do not direct spray at the tape line.

FAQ

Will the 3M tape damage factory paint?
No. With proper removal technique (heat and dental floss line), it can be removed without paint damage.

Does this spoiler fit the BMW M2 F87 (2016-2021)?
No. G87 and F87 have different trunk lid geometry. A separate carbon spoiler is available for F87.

Will the powered trunk operation be affected?
No. The added weight (~300-400 g) is within the trunk strut capacity; automatic opening works normally.

Is it compatible with the S58-powered M2 G87?
Yes — fits all M2 G87 trims (standard, Competition, and the upcoming CS). Spoilers for M3 G80 / M4 G82 sedans and coupés are listed separately.

Does the tape weaken in cold weather?
Properly installed 3M VHB tape holds across -40°C to +90°C. Installing at room temperature is essential.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. International shipping available.

Warranty?
BYC Performance offers a 12-month manufacturer warranty on this product.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes BMW M2 carbon parts, BMW M3 carbon diffusers, Audi RS carbon hoods, Porsche carbon spoilers, and many more high-quality carbon components. All parts undergo strict quality control.