BMW M3 G80 / M4 G82 | Prepreg Dry Carbon Fiber AC Front Canard

BMW M3 G80 / M4 G82 Prepreg Dry Carbon Fiber AC Front Canard

Engineered for BMW M3 G80 and M4 G82 owners who demand racing-grade quality, this Prepreg Dry Carbon Fiber AC Front Canard adds aggressive M Performance styling to the front bumper corners. Made to factory-spec mounting tolerances by leading manufacturers around the world and quality-controlled by BYC Performance, this BMW G80 / G82 carbon canard set bolts directly to OEM mounting points.

If you're building a serious BMW M3 G80 tuning or M4 G82 modification project and need an aerodynamic part that goes beyond the factory look, this dry carbon AC canard set is built for you. Autoclave-cured prepreg carbon is noticeably lighter than wet-lay carbon, with far superior durability and outstanding UV resistance. Engineered to match the aggressive character of the S58-powered current-generation M3 Sedan G80, M3 Touring G81, M4 G82 Coupé and M4 G83 Convertible (473-543 hp) across every trim: standard, Competition, CS and CSL.

Key Features

• Prepreg (Dry) Carbon Technology: Pre-impregnated plies cured in an autoclave under high heat and pressure for a more consistent weave.
• AC-Style Canard Design: Motorsport-inspired aggressive wing profile, mounted to front bumper sides.
• Aerodynamic Gain: Manages front-axle airflow at speed and contributes to steering response.
• Race-Grade Strength: Carbon fiber offers very high strength for its weight.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under high-gloss UV-protective clear coat.
• Direct OEM Fit: Plug & play installation on M3 G80 Sedan and M4 G82/G83 Coupé/Convertible front bumpers.
• UV & Chemical Protection: Long-life clear coat protects against fading, cracking, and road debris.

Prepreg (Dry) Carbon vs. Wet Carbon: Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature, leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• Controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Installation Notes

Canard installation uses 3M VHB double-sided tape with optional screw fastening. Professional installation recommended:

1. Clean mounting area with isopropyl alcohol.
2. Test-fit the canard and mark its position.
3. Peel the 3M VHB backing and press the canard firmly into place.
4. Install optional rear support screws.
5. Do not wash the vehicle for 24 hours to allow full tape bonding.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Avoid directing high-pressure water at canard edges.

FAQ

Is it compatible with both M3 G80 and M4 G82?
Yes. The front bumper geometry is identical on M3 G80 Sedan, M4 G82 Coupé and M4 G83 Convertible.

Compatible with M3 CS / M4 CS / M4 CSL?
Yes. All G80/G82 trims (standard, Competition, CS, CSL) share the same front bumper mounting geometry.

Does it fit the BMW M2 G87?
No. M2 G87 has different front bumper geometry even though it shares the S58 engine.

Compatible with M3 F80 / M4 F82 (previous gen)?
No. The F-generation (S55, 2014-2020) uses different front bumper geometry; a separate F80/F82 canard is available in our catalog.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof and weather-resistant.

Shipping time?
In-stock items ship within 1-3 business days via multiple carriers. Parts sourced to order are delivered within 30 days of the order date at the latest.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world and supplying them to the Turkish market. Our catalog includes BMW M3 carbon parts, BMW M4 carbon diffusers, Audi RS carbon hoods, Porsche carbon spoilers, and many more high-quality carbon components. All parts are sourced from leading manufacturers around the world and undergo strict quality control.