BMW M3 G80 / M4 G82 | Prepreg Dry Carbon Fiber Front Bumper Canards

BMW M3 G80 / M4 G82 Prepreg Dry Carbon Fiber Front Bumper Canards

Engineered for BMW M3 G80 and M4 G82 owners, this Prepreg Dry Carbon Fiber Front Bumper Canard (flick) set mounts to the front bumper side panels and channels aerodynamic flow at speed. They balance front-axle downforce distribution and add an aggressive track-day accessory to the side profile. Imported from leading manufacturers around the world and quality-controlled by BYC Performance, this BMW G80/G82 carbon canard set bolts directly to OEM front bumper side panels.

If you're building a BMW M3 G80 tuning or M4 G82 modification project and want a part that delivers measurable track-day aero plus aggressive styling, this canard set is the ideal choice. Autoclave-cured prepreg carbon is noticeably lighter than wet-lay parts, offers very high strength for its weight, and outstanding UV resistance. Fits every trim of the S58-powered G-generation M family (M3 G80 473 hp, Comp 503 hp, CS 543 hp; M4 G82 + CSL 543 hp).

Key Features

• Aerodynamic Canard Profile: Track-day airflow control; optimizes front-axle downforce distribution.
• Prepreg Dry Carbon Technology: Autoclave-cured under high heat and pressure for a more consistent weave.
• Dual Profile Fit: Direct fit on M3 G80 Sedan and M4 G82/G83 Coupé/Convertible front bumper side panels.
• Pair Set: Supplied as left + right; symmetric aerodynamic effect.
• Race-Grade Strength: Very high strength for its weight; resists wind loads at speed.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under a high-gloss UV-protective clear coat.
• Direct OEM Fit: 3M tape + supplied screw points. No cutting required.

Prepreg Dry Carbon vs. Wet Carbon: Which Is Better?

Most aftermarket carbon parts use wet lay-up, where resin is hand-applied at room temperature, leaving voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → very high strength for its weight
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Installation Notes

1. Clean the front bumper side panel with isopropyl alcohol.
2. Dry-fit the canards (symmetry is critical).
3. Peel adhesive backing progressively.
4. Apply firm 30-second pressure on each section.
5. Tighten supplied screw points into pilot holes.
6. Avoid washing for 24 hours.

Care & Maintenance

Wash with pH-neutral shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer 30 cm away.

FAQ

Does this fit both M3 G80 and M4 G82?
Yes. M3 G80 Sedan and M4 G82 Coupé share the same front bumper side panel geometry; M4 G83 Convertible is also compatible.

Is there a benefit for daily driving outside of track?
Aerodynamic effect is noticeable above 120 km/h. For daily driving, the visual gain dominates.

Compatible with M3 CS, M4 CS, M4 CSL?
Yes. All G80/G82 trims (standard, Competition, CS, CSL) share the same front bumper side panel geometry.

Compatible with M3/M4 F80/F82 (previous gen)?
No. F-generation uses different front bumper side panel geometry.

Compatible with M2 G87?
No. M2 G87 uses different front bumper geometry.

Will rain damage dry carbon?
No. Autoclave-cured prepreg carbon is fully waterproof.

Shipping time?
In-stock items ship within 1-3 business days. International shipping available. Parts sourced to order are delivered within 30 days of the order date at the latest.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world. Our catalog includes BMW M3 carbon parts, BMW M4 carbon canards, Audi RS carbon hoods, Porsche carbon spoilers, and many more. All parts undergo strict quality control.