BMW M3 G80 / M4 G82 | Prepreg Dry Carbon Fiber Air-Vented Front Fender Set

BMW M3 G80 / M4 G82 Prepreg Dry Carbon Fiber Air-Vented Front Fender Set

Engineered for BMW M3 G80 and BMW M4 G82 owners, this Prepreg Dry Carbon Fiber Air-Vented Front Fender Set brings GT-inspired functional vent outlets that lower brake and engine bay temperatures. Autoclave-cured by leading manufacturers around the world and quality-controlled by BYC Performance, this G80 / G82 carbon fender set replaces the OEM steel fender directly.

Designed to match the aggressive lines of the new-generation S58-powered M family (M3 Sedan G80 473-543 hp, M4 Coupé G82 473-543 hp), the vented design fits both M3 G80 and M4 G82 front axles identically. The vents evacuate hot air from the engine compartment, supporting thermal management: especially valuable on track. Prepreg carbon fiber cured under high heat and pressure in an autoclave is noticeably lighter than OEM steel.

Key Features

• Prepreg Dry Carbon Technology: Pre-impregnated carbon plies cured in an autoclave under high heat and pressure for a more consistent weave.
• Functional Vent Outlets: GT racing-inspired external vents reduce engine bay and brake heat soak.
• Weight Reduction: Replaces OEM steel fenders; noticeably lighter.
• Wider Tire Clearance: Slightly widened arch geometry accommodates wide offset and track wheels.
• 2x2 Twill Carbon Weave: Authentic carbon fiber pattern under a high-gloss UV-protective clear coat.
• Direct OEM Fit: Bolts to M3 G80 Sedan and M4 G82 Coupé factory mounting points; headlight and door gap alignment preserved.
• Left + Right Pair: Driver + passenger side, matched weave and color.

Prepreg Dry Carbon vs. Wet Carbon: Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature, leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Installation Notes

Fender installation is a professional job; front bumper and headlight removal may be required:

1. Remove the front bumper and headlight (and inner fender liner if needed).
2. Unbolt the OEM steel fender.
3. Test-fit the new carbon fender for alignment.
4. Secure using OEM bolts to the manufacturer's recommended torque.
5. Verify door gap and headlight line alignment.
6. Reinstall the bumper and headlight.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface.

FAQ

Does this fit both M3 G80 and M4 G82?
Yes. The M3 G80 Sedan and M4 G82 Coupé share identical front fender mounting points; one set fits both chassis perfectly.

Compatible with M3 Touring G81 and M4 G83 Convertible?
Yes. G81 Touring and G83 Convertible share the G80/G82 front fender geometry.

Compatible with M3 CS, M4 CSL, and Competition trims?
Yes. All G80/G82 trims (standard, Competition, CS, CSL) share the same front fender geometry.

Compatible with previous-generation F80/F82?
No. F80 (2014-2018) and F82 (2014-2020) are S55-powered previous-gen cars with different fender geometry.

Compatible with M2 G87?
No. M2 G87 has different front fender geometry.

Do the vents actually reduce temperatures?
Yes. Hot air inside the engine compartment evacuates into the low-pressure region inside the arch; the benefit is most noticeable in extended track use.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. Domestic delivery in 1-2 days; international shipping available. Parts sourced to order are delivered within 30 days of the order date at the latest.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world and supplying them to the Turkish market. Our catalog includes BMW M3 G80 carbon parts, BMW M4 G82 carbon diffusers, Audi RS carbon hoods, Porsche carbon spoilers, and many more high-quality carbon components. All parts undergo strict quality control.