BMW M5 F90 Prepreg Dry Carbon Fiber Front Aero Canards

Engineered for BMW M5 F90 owners who want a true motorsport detail, these Prepreg (Dry) Carbon Fiber Front Aero Canards mount to the front bumper side corners — adding race-track character while subtly improving front-axle aero. Manufactured in Europe and quality-controlled by BYC Performance, this BMW M5 F90 carbon aero canard set (left + right) bolts to OEM bumper clip and mounting points with no cutting or permanent modification required.

If you want to add a small but striking aero element to your BMW M5 F90 tuning build, these dry carbon front aero canards are built for you. Autoclave-cured prepreg carbon fiber is noticeably lighter than wet-lay carbon parts, offers very high strength for its weight, and delivers outstanding long-term UV resistance. The aggressive race-track character matches the S63B44T4 600-635 hp F90 M5 perfectly.

Key Features

• Prepreg (Dry) Carbon Technology: Pre-impregnated carbon plies cured in an autoclave under high heat and pressure ensure a consistent weave.
• Left + Right Pair Set: Matched L+R canard set fitted to F90 M5 front bumper side corners.
• Aero Wing Profile: Directs airflow at the front axle and adds bite into bumper corners under turn-in.
• Race-Grade Strength: Carbon fiber offers very high strength for its weight. Resists stone chips and light contact.
• 2x2 Twill Carbon Weave: Authentic carbon fiber pattern under a high-gloss UV-protective clear coat.
• Direct OEM Fit: Plug & play installation on factory F90 M5 (pre-LCI) front bumper side corner points.
• UV & Chemical Protection: Long-life clear coat protects against fading, cracking, fuel splash, and road tar.

Prepreg (Dry) Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This BMW M5 F90 front aero canard set fits the following models perfectly:

• BMW M5 F90 Sedan (2018, 2019, 2020) — S63B44T4 V8 (600 hp)
• BMW M5 Competition F90 (2019, 2020) — S63 (617 hp)

Important notes:

• This product is NOT compatible with the F90 LCI (2021+ facelift). LCI has different front bumper side corner geometry; a separate LCI carbon canard set is available in our catalog.
• This product is NOT compatible with BMW M5 F10 (previous-generation 2011-2017) or BMW M5 G90 (new-generation 2024+ hybrid).
• This product is NOT compatible with BMW M3 F80 / M4 F82 or BMW M3 G80 / M4 G82 — the M3/M4 family has different bumper geometry.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Set Contents: Left + Right Aero Canards (2 pieces)
• Origin: Europe

Installation Notes

Installing the BMW M5 F90 carbon aero canards mounts small aero pieces to the front bumper side corners. Professional installation is recommended:

1. Clean the front bumper side corner surface with isopropyl alcohol and dry.
2. Test-fit left and right canards dry (symmetry is critical — L+R must match angle and height).
3. Secure with supplied 3M double-sided tape or hardware kit.
4. If using screws, fasten to OEM bumper side clip points to the manufacturer's recommended torque.
5. Do not wash the vehicle for the first 24 hours; allow tape to fully bond.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from the surface. Avoid curb scrapes when parking.

FAQ

Does this fit the F90 LCI (2021+)?
No. The F90 LCI facelift has different front bumper side corner geometry. A separate carbon canard set for the LCI is available in our catalog.

Compatible with both standard M5 and M5 Competition?
Yes. This set fits both 2018-2020 standard M5 F90 (600 hp) and 2019-2020 M5 Competition F90 (617 hp) — front bumper side corner geometry is identical across pre-LCI F90 trims.

Is this the same as the BMW M5 F10?
No. M5 F10 (2011-2017) is the previous generation with different bumper side corners. A separate carbon canard set for the F10 is available.

Does it fit BMW M3 F80 / M4 F82?
No. M3 F80 and M4 F82 have different chassis and bumper geometry. Separate F-series M3/M4 canard sets are available.

Is the tape mount long-lasting?
Yes. The supplied 3M automotive double-sided tape, applied correctly, lasts for years. A screw-mount option is available for users who want a more secure alternative.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof and weather-resistant.

Shipping time?
In-stock items ship within 1-3 business days. International shipping available.

Warranty?
BYC Performance offers a 12-month manufacturer warranty on this product.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes BMW M5 carbon parts, BMW M3 carbon diffusers, Audi RS carbon hoods, Porsche carbon spoilers, and many more high-quality carbon components. All products undergo strict quality control.