Mercedes-Benz AMG C63 Coupe (C205, 2015-2021) Prepreg Dry Carbon Fiber Front Lip

Engineered for Mercedes-AMG C63 Coupe (C205, 2015-2021) owners who demand racing-grade quality, this Prepreg Dry Carbon Fiber Front Lip transforms the nose of your performance coupe with track-grade aggression while contributing to aerodynamic balance. Manufactured in Europe to factory-spec mounting tolerances and quality-controlled by BYC Performance, this Mercedes C63 Coupe carbon front lip bolts directly to OEM mounting points — no cutting, no drilling, no modification required.

IMPORTANT: This front lip is designed exclusively for the C63 / C63 S Coupe (C205). It is NOT compatible with the Sedan (W205) — the Coupe has wider rear track and flared fenders accompanied by a different front bumper geometry.

If you're building a serious Mercedes C63 tuning project and need a part that exceeds the factory plastic in both performance and finish, this dry carbon front lip is built for you. Autoclave-cured prepreg carbon fiber delivers a noticeably lighter part than wet-lay carbon, superior structural integrity, and outstanding UV resistance. Engineered to match the AMG racing DNA of the C63 Coupe's 4.0L V8 biturbo M177 engine (469-503 hp), this aggressive lip profile is the ideal upgrade for both track and street.

Key Features

• Prepreg Dry Carbon Technology: Pre-impregnated carbon plies cured in autoclave under high heat and pressure ensure a more consistent weave and resin distribution.
• AMG GT3-Inspired Design: Sharp lip profile matching the Coupe's aerodynamic character. Noticeably lighter than factory plastic.
• Race-Grade Strength: Carbon fiber offers very high strength for its weight. Resists stone chips and curb scrapes.
• Aerodynamic Performance: Optimized lip geometry directs air to the road, contributing to front-axle downforce at speed.
• 2x2 Twill Carbon Weave: Authentic carbon fiber pattern under a high-gloss UV-protective clear coat.
• Direct OEM Fit: Plug & play installation on factory Mercedes-AMG C63 Coupe (C205, 2015-2021) front bumper.
• UV & Chemical Protection: Long-life clear coat protects against fading, cracking, fuel splash, and road tar.

Prepreg Dry Carbon vs. Wet Carbon

Most aftermarket carbon parts use wet lay-up, where resin is applied by hand and cured at room temperature — leaving voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in autoclave under heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years

Vehicle Fitment

This Mercedes C63 Coupe front lip fits:

• Mercedes-AMG C63 Coupe (C205, 2015-2018 pre-facelift) — M177 4.0L V8 biturbo, 469 hp
• Mercedes-AMG C63 S Coupe (C205, 2015-2018 pre-facelift) — M177 4.0L V8 biturbo, 503 hp
• Mercedes-AMG C63 Coupe (C205, 2018-2021 facelift) — M177 4.0L V8 biturbo, 469 hp
• Mercedes-AMG C63 S Coupe (C205, 2018-2021 facelift) — M177 4.0L V8 biturbo, 503 hp

Important notes:

• NOT compatible with C63 Sedan (W205). The Coupe's flared fender setup requires a different front bumper geometry; a separate Sedan carbon front lip is available.
• NOT compatible with W206 (2022+) next-gen C-Class.
• NOT compatible with previous-gen W204 C63 (2007-2014).
• NOT compatible with non-C63 W205 trims (C200/C300/C43) — this lip belongs to the C63-specific front bumper.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

Installing the Mercedes C63 Coupe carbon front lip is a direct add-on to the OEM front bumper. Professional installation is recommended:

1. Raise the vehicle and clean the front bumper lower surface thoroughly.
2. Test-fit the lip for alignment.
3. Secure with 3M VHB double-sided tape and supplied hardware (to the manufacturer's recommended torque).
4. Allow 24 hours for tape to bond; do not wash during this period.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface.

FAQ

Does this fit the C63 Sedan (W205)?
No. The C63 Coupe (C205) has different fender and front bumper geometry than the Sedan. A separate Sedan carbon front lip is available in our catalog.

Compatible with W206 (2022+)?
No. W206 is a new generation with different chassis and front bumper geometry.

Compatible with W204 C63 (2007-2014)?
No. W204 is the previous generation with a different front bumper.

Difference between C63 and C63 S?
No fitment difference. This lip fits both C63 (469 hp) and C63 S (503 hp) Coupe — both share the same front bumper geometry.

Difference between pre-facelift (2015-2018) and facelift (2018-2021)?
No fitment difference. This lip is designed for both production periods of the C63 Coupe.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof and weather-resistant.

Shipping time?
In-stock items ship within 1-3 business days. International shipping available.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes Mercedes AMG carbon parts, C63 carbon front lips, BMW M carbon diffusers, Audi RS carbon spoilers, and many more high-quality carbon components.