Mercedes-Benz AMG C63 W204 (2007-2014) Prepreg Dry Carbon Fiber Hood

Engineered for Mercedes-Benz AMG C63 W204 (C-class 3rd gen, 2007-2014) owners, this Prepreg Dry Carbon Fiber Hood delivers a worthwhile weight saving and aggressive aesthetics. Manufactured in Europe and quality-controlled by BYC Performance, this W204 C63 carbon hood bolts directly to OEM mounting points — no cutting, no drilling.

If your C63 AMG build needs a part that surpasses the steel factory hood, this dry carbon hood is the answer. Autoclave-cured prepreg construction is noticeably lighter than the steel OEM hood. Reduced front-axle weight sharpens steering response and supports thermal venting for the legendary M156 6.2L V8 NA engine (451 hp standard / 481 hp Black Series / 510 hp limited).

Key Features

• Prepreg Dry Carbon Technology: Pre-impregnated carbon plies cured in an autoclave under high heat and pressure ensure a more consistent weave and resin distribution.
• Weight Reduction: Noticeably lighter than the steel OEM hood. Lower front-axle weight improves steering feel.
• Race-Grade Strength: Very high strength for its weight.
• Thermal Support: Supports heat venting from the M156 6.2L V8 engine bay.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under high-gloss UV-protective clear coat.
• Direct OEM Fit: Plug & play installation on W204 C-class (2007-2014) hinge and latch points.
• UV & Chemical Protection: Long-life clear coat resists fading and cracking.

Prepreg Dry Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts use wet lay-up with hand-applied resin cured at room temperature, leaving voids and inconsistent weight. Prepreg (dry) carbon:

• Autoclave-cured under heat and pressure → a more consistent weave
• A controlled resin ratio → lighter, stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This W204 carbon hood fits the following models:

• Mercedes-Benz C63 AMG W204 Sedan (2008-2014) — M156 6.2L V8 NA, 451-481 hp
• Mercedes-Benz C63 AMG W204 Coupé (C204, 2011-2014) — M156 6.2L V8
• Mercedes-Benz C63 AMG W204 Estate / Wagon (S204, 2008-2014)
• Mercedes-Benz C63 AMG Black Series W204 (2012) — M156 6.2L V8, 510 hp

Important notes:

• NOT compatible with W205 C-class (2014-2021). W204 and W205 are different generations with different hood geometry and hinge positions.
• On non-AMG W204 trims (C200/C220/C250/C300), front-bumper visual harmony may benefit from carbon add-ons; verify fitment with the AMG front bumper for full aesthetic match.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

Direct replacement of the OEM hood. Professional installation recommended:

1. Open the hood and disconnect any service lights/wiring at the fender wells.
2. Mark hinge bolt positions and remove; carefully lower the OEM hood.
3. Test-fit the carbon hood, verify panel gaps.
4. Torque hinge and gas-strut bolts to the manufacturer's recommended torque.
5. Test the latch mechanism; adjust latch height if needed.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure-washer nozzle at least 30 cm from the surface.

FAQ

Does this fit the W205?
No. W204 and W205 are different generations with different hood geometry. A separate W205 carbon hood is available in our catalog.

Compatible with Coupé (C204) and Estate (S204)?
Yes. W204 Sedan, Coupé (C204), and Estate (S204) share identical front hood geometry.

Fits non-AMG W204 models?
Yes — the hood itself fits all W204 (2007-2014) models. Non-AMG bumpers may benefit from additional carbon trim for visual harmony.

Fits the Black Series?
Yes. The Black Series has a unique front bumper but uses the standard W204 hood hinge and latch points.

Do I need new gas struts?
The carbon hood is lighter than steel; OEM struts continue to function, though fresh struts are recommended for best performance.

Will rain damage dry carbon?
No. Autoclave-cured prepreg carbon is fully waterproof and weather-resistant.

Shipping time?
In-stock items ship within 1-3 business days. International shipping available.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers. Our catalog includes Mercedes AMG carbon hoods, C63 AMG carbon parts, BMW M3 carbon diffusers, Audi R8 carbon parts, and many more high-quality carbon components.