Mercedes-Benz AMG CLA C117 | Prepreg Dry Carbon Fiber Vented Front Hood

Mercedes-Benz AMG CLA C117 (2013-2019) Prepreg Dry Carbon Fiber Vented Front Hood

Engineered for Mercedes-Benz AMG CLA C117 first-generation (2013-2019) owners, this Prepreg Dry Carbon Fiber Vented Front Hood optimizes heat extraction from the CLA45 AMG's M133 2.0L turbo while giving the front end an aggressive GTR-style look. Made to factory-spec tolerances by leading manufacturers around the world and quality-controlled by BYC Performance, this CLA C117 carbon vented hood bolts directly to OEM hinges and latch hardware.

If you're building a serious CLA C117 tuning project and need a hood that is dramatically lighter, vents engine bay heat, and looks like motorsport, this dry carbon vented hood is built for you. Autoclave-cured prepreg carbon fiber is noticeably lighter than the stock steel hood, meaning reduced front-axle weight and sharper turn-in response. Integrated vents extract hot air from the M133 turbo and intercooler, lowering engine bay temperatures.

Key Features

• Prepreg (Dry) Carbon Technology: Pre-impregnated carbon plies cured in an autoclave under high heat and pressure ensure a more consistent weave.
• Functional Air Vents: Integrated vent openings extract engine bay heat, improving M133 turbo + intercooler efficiency.
• Significant Weight Reduction: Noticeably lighter than the stock steel hood. Improved front-axle weight distribution and sharper steering feel.
• Dual-Sided Carbon: Top surface 2x2 twill show carbon, underside structural carbon mesh, both aesthetics and engineering.
• OEM Hinge Compatible: Direct fit to stock hinges, latch, and gas struts.
• UV & Chemical Protection: High-gloss clear UV-protective resin protects against fading and cracking.
• Track + Daily Use: Fully weather-resistant. Track-tested engine bay heat reduction.

Prepreg (Dry) Carbon vs. Wet Carbon

Most aftermarket carbon hoods are wet lay-up; resin is hand-applied and cured at room temperature, leaving voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading

Installation Notes

Carbon hood replacement requires professional installation:

1. Prop the stock hood open and detach the gas struts and latch mechanism.
2. Loosen hinge bolts, lift the stock hood with a helper.
3. Place the carbon hood onto the hinges, loosely fasten bolts.
4. Check alignment (front gap, side gap), torque hinge bolts to the manufacturer's recommended torque.
5. Reconnect the latch mechanism, test closure.
6. Reinstall the gas struts.

Care & Maintenance

Wash with pH-neutral shampoo. Clean vent edges with a soft brush. After track use, wipe heat marks with a carbon-safe cleaner.

FAQ

Does this fit the Mercedes CLA C118 (2019+)?
No. C117 and C118 are different generations with different hood length and hinge geometry.

Compatible with the W176 A45 AMG?
No. W176 and C117 share the M133 engine, but the hood lines differ. A separate W176 carbon hood is available in our catalog.

Are the vents functional?
Yes. Vent openings extract engine bay heat and notably lower bay temperatures during track use. Internal deflectors prevent rain ingress.

Is it lighter than stock?
Yes, noticeably lighter than the stock steel hood, improving front-axle weight distribution.

Compatible with the CLA Shooting Brake X117?
Yes. X117 wagon and C117 sedan share the same hood.

Difference between pre-facelift and facelift CLA C117?
No. 2013-2016 and 2017-2019 share identical hood mounting points (minor exterior styling differences may exist).

Will rain damage the carbon hood?
No. Autoclave-cured prepreg carbon is fully waterproof. Vents have internal deflectors.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. International shipping available. Parts sourced to order are delivered within 30 days of the order date at the latest.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world and supplying them to the Turkish market. Our catalog includes Mercedes AMG carbon parts, CLA C117 carbon hoods, C63 W205 carbon hoods, BMW M3 carbon hoods, and many more high-quality carbon components.