Mercedes-Benz AMG GT C190 (2014-2020) Prepreg Dry Carbon Fiber Plexi-Vented Hood

Designed for Mercedes-AMG GT C190 2-door sports car (2014-2020) owners, this Prepreg Dry Carbon Fiber Plexi-Vented Hood is a show-quality carbon hood with a clear acrylic inspection panel at its centre — putting the M178 4.0L V8 biturbo engine cover on visible display, while delivering noticeable weight savings over the stock aluminum hood through autoclave-cured carbon construction. Manufactured in Europe to factory-spec tolerances and quality-controlled by BYC Performance, this C190 carbon plexi hood bolts directly to OEM hinges.

The plexi (clear acrylic) inspection window in the centre of the hood visually showcases AMG iconic AMG 4.0L V8 BITURBO Affalterbach handmade engine cover — an engineering detail designed for collector cars, show cars, and concours-grade restoration projects. The autoclave prepreg carbon construction also delivers significant front-axle weight reduction.

Key Features

• Prepreg (Dry) Carbon Technology: Autoclave-cured under high heat and pressure; a more consistent weave.
• Clear Plexi Inspection Window: Heat-resistant automotive-grade acrylic panel at the hood centre — engine cover and V8 biturbo details remain visible.
• Show-Quality Build: Designed for concours-grade show cars and collector projects; puts AMG Affalterbach handmade engine cover on display.
• Significant Weight Reduction: Noticeably lighter than the stock aluminum hood. Improved front-axle weight distribution, sharper steering feel.
• Dual-Sided Carbon: Top surface 2x2 twill show carbon, underside structural carbon mesh.
• OEM Hinge Compatible: Direct fit to stock hinges, latch, and gas struts.
• UV & Chemical Protection: High-gloss clear UV-protective resin covers both the carbon and plexi surfaces.

What is a Plexi-Vented Hood?

A plexi-vented carbon hood combines prepreg carbon construction with a high-grade clear acrylic panel set at its centre. Design intent:

• Visual Showpiece: The M178 V8 biturbo engine cover stays visible from the outside — favored for show cars and concours-grade collector projects.
• Engine Bay Lighting: Pairs with engine-bay LED accents for a premium presentation when parked.
• Track + Daily Use: The automotive-grade acrylic panel is heat-, UV-, and wash-resistant; suitable for daily driving.

Prepreg (Dry) Carbon vs. Wet Carbon

Prepreg carbon is autoclave-cured under heat and pressure, a more consistent weave, a controlled resin ratio. The production method widely chosen in motorsport; noticeably lighter and stronger.

Vehicle Fitment

This AMG GT C190 carbon plexi hood fits the following models:

• Mercedes-AMG GT C190 Coupe (2014-2020) — M178 4.0L V8 biturbo
• Mercedes-AMG GT S C190 (510 hp)
• Mercedes-AMG GT C C190 (550 hp)
• Mercedes-AMG GT R C190 (577 hp)
• Mercedes-AMG GT R Pro C190 (577 hp, 2019)
• Mercedes-AMG GT Roadster C190 (2017-2020) — convertible
• Mercedes-AMG GT Black Series C190 (720 hp, 2020 limited) — please confirm before ordering due to Black Series unique aero hood

Important notes:

• This product is NOT compatible with the 4-door AMG GT X290 (GT 4-Turer / GT 63). C190 sports car and X290 4-door are different chassis with different hood length and hinge geometry.
• The Black Series unique aero hood (vented hood with a through-air system) is different from this plexi-hood design; contact our support team before ordering for Black Series.
• The plexi panel is automotive-grade and heat-resistant, but engine bay temperatures get high on long track sessions; check the perimeter seal annually if you track the car.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave, dual-layer) + automotive-grade clear acrylic plexi panel
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Plexi Thickness: 6-8 mm automotive acrylic
• Weight: Noticeably lighter than the stock aluminum hood
• Color: Natural carbon weave black + clear plexi
• Origin: Europe

Installation Notes

Professional installation required:

1. Prop the stock hood open and detach the gas struts and latch.
2. Loosen hinge bolts, lift the stock hood with a helper.
3. Place the carbon hood onto the hinges, loosely fasten bolts.
4. Check alignment (front gap, side gap), torque hinge bolts to the manufacturer's recommended torque.
5. Reconnect the latch mechanism, test closure.
6. Reinstall the gas struts.
7. Check the seal around the plexi panel.

Care & Maintenance

Wash the carbon surface with pH-neutral shampoo. Clean the plexi panel only with acrylic-safe cleaner (no harsh chemicals — plexi can scratch). Check the plexi seal annually. Apply carbon sealant every 6 months.

FAQ

Compatible with the AMG GT 4-Door X290?
No. C190 sports car and X290 4-door are different chassis with different hood length and hinge geometry.

Compatible with GT R and Black Series?
GT R fitment is confirmed. The Black Series unique aero hood (through-air vented) differs from this design; contact our support team for Black Series.

Can the plexi panel handle engine heat?
Yes. The 6-8 mm automotive-grade acrylic panel is heat-, UV-, and wash-resistant. Check the perimeter seal annually if you track the car.

How much lighter than stock?
Noticeably lighter than the stock aluminum hood; reduced front-axle weight sharpens steering feel.

Compatible with the Roadster (convertible)?
Yes. The AMG GT Roadster (2017-2020) and Coupe share the same hood.

What should I use to clean the plexi panel?
Only acrylic-safe cleaners (e.g., Plexus, Novus 1). Never use abrasive cloth, alcohol, or oil-based chemicals.

Will rain leak through the plexi panel?
No. The panel perimeter is sealed with automotive-grade EPDM gasket.

Will rain damage dry carbon?
No.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers. Our catalog includes Mercedes AMG carbon parts, AMG GT C190 carbon plexi hoods, C63 W205 carbon hoods, BMW M3 carbon hoods, and many more high-quality components.