Porsche 911 991 / 991.2 | Prepreg Dry Carbon Fiber GT2RS Hood

Porsche 911 991 / 991.2 Prepreg Dry Carbon Fiber GT2RS Hood

Engineered for Porsche 911 991/991.2 owners who want motorsport-grade aggression and meaningful front-axle weight savings, this Prepreg (Dry) Carbon Fiber GT2RS Hood transforms the front of your 911 while shaving meaningful mass from the nose. Made to factory-spec mounting tolerances by leading manufacturers around the world and quality-controlled by BYC Performance, this Porsche 911 carbon hood bolts directly to OEM hinge and latch points: no cutting, no drilling, no modification required.

The 911 is the definitive rear-engine flat-6 sports car icon. The 991.2 GT2 RS (2018), the most powerful 911 of its era at 700 hp from a 3.8L twin-turbo flat-6, set the visual language this hood references. This GT2RS carbon hood serves both as a factory-equivalent replacement panel for 991.2 GT2 RS owners AND as an aggressive visual and functional upgrade for 991/991.2 Carrera, Carrera S, GTS, Turbo, and Turbo S owners. Autoclave-cured prepreg construction is noticeably lighter than the OEM aluminum hood, with superior structural integrity and outstanding long-term UV resistance.

Key Features

• Prepreg (Dry) Carbon Technology: Pre-impregnated carbon plies cured in an autoclave under high heat and pressure, homogeneous resin distribution, a more consistent weave.
• GT2RS-Style Heat Extraction Vents: Central vent channel reduces engine bay heat soak and contributes to front-end downforce at speed.
• Significant Weight Reduction: Noticeably lighter than the OEM aluminum hood, lowers front-axle mass for sharper turn-in and improved steering feel.
• Race-Grade Strength: Carbon fiber offers very high strength for its weight. Resists stone chips and light contact.
• 2x2 Twill Carbon Weave: Authentic carbon fiber pattern under a high-gloss UV-protective clear coat.
• Direct OEM Fit: Plug & play installation on factory 991 / 991.2 hinge and latch points.
• UV & Chemical Protection: Long-life clear coat protects against fading, cracking, fuel splash, and road tar.

Prepreg (Dry) Carbon vs. Wet Carbon: Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature, leaving voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Installation Notes

Installing the Porsche 911 carbon hood is a direct replacement of the factory aluminum panel. Professional installation is recommended:

1. Open the hood and secure the prop rod.
2. Disconnect the gas struts and remove the hinge bolts.
3. With two installers, lift the new carbon hood onto the hinge points and align.
4. Torque hinge bolts to the manufacturer's recommended torque.
5. Adjust latch and panel gaps; reconnect gas struts.
6. Verify vent openings are properly seated.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface.

FAQ

Does this fit the Porsche 911 992 (2020+)?
No. The 992 generation has entirely different hood, headlight, and bumper geometry; 992 owners should contact BYC for availability.

Does this fit the Porsche 911 997?
No. The 997 (2005-2012) is the previous generation with different panel dimensions.

I own a Carrera or Turbo. Can I install the GT2RS-style hood?
Yes. This hood is a visual and aerodynamic upgrade for 991/991.2 Carrera, Carrera S, GTS, Turbo and Turbo S Coupé owners. Hinge points are shared across all 991/991.2 trims.

Compatible with Cabriolet or Targa?
Yes. The hood area is shared across 991/991.2 Coupé, Cabriolet, and Targa.

Does the vented hood actually lower engine temperatures?
Yes. The central heat extraction vent reduces engine bay pressure and helps keep turbo and radiator temperatures more stable, especially during track use.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. Special oversized packaging is used for hoods. Parts sourced to order are delivered within 30 days of the order date at the latest.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world and supplying them to the Turkish market. Our catalog includes Porsche 911 carbon parts, Porsche carbon spoilers, Audi RS carbon diffusers, BMW M3 carbon hoods, and many more high-quality carbon components.