Porsche Cayenne 9YA (2018+) Prepreg Dry Carbon Fiber Hood

Engineered for Porsche Cayenne 9YA (E3 / PO536, 2018+) owners, this Prepreg Dry Carbon Fiber Hood (solid / non-vented) brings a clean, prestige carbon look to your luxury SUV while delivering significant weight savings. Manufactured in Europe and quality-controlled by BYC Performance, this Porsche Cayenne carbon hood bolts directly to OEM hinge and latch points — no cutting, no drilling.

If you're building a Porsche Cayenne tuning project and prefer an OEM+ smooth carbon panel over the aggressive vented look, this dry carbon hood is built for you. Autoclave-cured prepreg carbon is substantially lighter than the factory aluminum/steel hood; reducing front axle mass improves steering feel and brake response. The weight savings are especially meaningful on high-performance trims like the 4.0L V8 biturbo Cayenne Turbo (550 hp) and Turbo GT Coupé (631 hp).

Key Features

• Prepreg Dry Carbon Technology: Autoclave-cured under high heat and pressure with homogeneous resin distribution and a more consistent weave.
• Clean OEM+ Design: No vents — a smooth panel that preserves the factory hood line with elegant carbon presence.
• Significant Weight Savings: Substantially lighter than the OEM aluminum/steel hood; front-axle mass reduction improves dynamics.
• Race-Grade Strength: Carbon fiber offers very high strength for its weight.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under high-gloss UV-protective clear coat.
• Direct OEM Fit: Plug-and-play on Cayenne 9YA SUV and Coupé hinge and latch points.
• UV & Heat Protection: Clear coat resists engine bay heat and UV fading.

Prepreg Dry Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon is wet lay-up with hand-applied resin cured at room temperature — leaving voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Porsche Cayenne carbon hood fits the following models:

• Porsche Cayenne 9YA SUV (2018, 2019, 2020, 2021, 2022, 2023, 2024) — all trims
• Porsche Cayenne 9YA Coupé (2019, 2020, 2021, 2022, 2023, 2024) — all trims
• Cayenne S 3.0L V6 turbo (340 / 440 hp)
• Cayenne GTS 4.0L V8 biturbo (460 hp)
• Cayenne Turbo 4.0L V8 biturbo (550 hp)
• Cayenne Turbo GT Coupé 4.0L V8 biturbo (631 hp)
• Cayenne E-Hybrid / Turbo S E-Hybrid

Important notes:

• NOT compatible with previous-generation Porsche Cayenne 9PA (2010-2018). Different hood geometry.
• A vented version of the Porsche Cayenne carbon hood is also available — choose based on aesthetic preference.
• Lighter hood-strut pistons are recommended — OEM pistons may open aggressively with the lighter carbon panel.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

Direct bolt-on to factory hinges. Professional installation strongly recommended:

1. Park on level ground, allow engine to cool.
2. Remove OEM hood pistons and detach hinges.
3. With at least 2 people, lift the carbon hood onto the hinges.
4. Install hinge bolts loosely; adjust hood-bumper gap (3-5 mm).
5. Torque all bolts to the manufacturer's recommended torque.
6. Test the latch mechanism; adjust latch pin height as needed.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer at least 30 cm away. Avoid washing while engine is hot.

FAQ

Does this fit the 9PA (2010-2018)?
No. The 9PA is the previous generation with different hood geometry.

Compatible with both SUV and Coupé?
Yes. Cayenne 9YA SUV and Coupé share the same front hood line and hinge points.

Does it have vents?
No. This is the solid (non-vented) version. A vented hood is available as a separate SKU.

Will the hood struts cause issues?
Because the carbon hood is lighter, OEM struts may open aggressively. Lighter-rated piston struts are recommended.

Can it be painted?
Painting directly over the clear coat is not recommended. For colored finish, use vinyl over PPF or a full re-coat process.

Will rain damage dry carbon?
No. Autoclave-cured prepreg carbon is fully waterproof.

Shipping time?
In-stock items ship within 1-3 business days via oversized freight.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers. Our catalog includes Porsche Cayenne carbon parts, Porsche carbon spoilers, Audi RS carbon hoods, BMW M carbon parts, and more.