Porsche Taycan Sedan (2019+) Prepreg Dry Carbon Fiber Slim Spoiler

Engineered for Porsche Taycan J1 Sedan (2019+, first-gen electric sport sedan) owners, this Prepreg Dry Carbon Fiber Slim Spoiler adds a low-profile motorsport accent to the trunk lid of your 800V electric sedan. Manufactured in Europe and quality-controlled by BYC Performance, this Porsche Taycan carbon slim spoiler mounts to the OEM trunk lid using 3M VHB tape — no permanent modification required.

If you are building a Porsche Taycan tuning project and want a clean lip-style spoiler that visually reinforces the factory active rear wing, this dry carbon slim spoiler is built for you. Autoclave-cured prepreg carbon fiber is noticeably lighter than wet-lay carbon parts, offers very high strength for its weight, and resists long-term UV fading. A subtle but unmistakable accent that complements the 800V dual-motor performance signature (Turbo S 750 hp launch, Turbo GT 2024+ 1019 hp launch, 0-100 km/h ~2.2 s).

Key Features

• Prepreg (Dry) Carbon Technology: Pre-impregnated carbon plies cured in an autoclave under high heat and pressure for a more consistent weave and balanced resin distribution.
• Slim Lip Profile: A low-profile lip that sits on the trunk-lid rear edge — eye-catching but not exaggerated.
• Race-Grade Strength: Carbon fiber offers very high strength for its weight.
• Does Not Interfere with the Active Wing: Static slim lip — does not block the factory active rear wing deployment travel.
• 2x2 Twill Carbon Weave: Authentic carbon fiber pattern under a high-gloss UV-protective clear coat.
• 3M VHB Tape Mounting: No-damage, no permanent modification.
• UV & Chemical Protection: Long-life clear coat protects against fading, cracking, bug spatter, and road tar.

Prepreg (Dry) Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger for its weight
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Porsche Taycan Sedan J1 carbon slim spoiler fits the following models:

• Porsche Taycan Sedan J1 (2019, 2020, 2021, 2022, 2023, 2024) — all trims
• Porsche Taycan / 4 / 4S J1 Sedan — 800V dual motor
• Porsche Taycan GTS J1 Sedan — 590 hp
• Porsche Taycan Turbo J1 Sedan — 680 hp
• Porsche Taycan Turbo S J1 Sedan — 750 hp launch
• Porsche Taycan Turbo GT J1 Sedan (2024+) — 1019 hp launch

Important notes:

• This spoiler is designed for the Porsche Taycan J1 Sedan trunk-lid geometry ONLY.
• Cross Turismo (2021+) and Sport Turismo (2022+) wagon bodies have integrated roof spoilers and different rear-deck geometry; this slim lip spoiler is NOT compatible with the wagon bodies.
• Taycan is a single-generation (J1) model, so no previous-gen disclaimer applies.
• Does not interfere with the factory active rear wing deployment travel.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Mounting: 3M VHB double-sided tape (included)
• Origin: Europe

Installation Notes

Installing the Porsche Taycan carbon slim spoiler requires care; professional installation is recommended:

1. Clean the trunk lid with isopropyl alcohol and ensure it is dry.
2. Mark the spoiler position relative to the trunk lid / panel edges.
3. Peel the 3M VHB liner gradually along the spoiler length.
4. Apply even pressure for 24 hours to activate the adhesive.
5. Do not wash or drive at high speed for the first 48 hours.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface.

FAQ

Compatible with Taycan Cross Turismo or Sport Turismo (wagon)?
No. Cross Turismo and Sport Turismo have integrated roof spoilers and different rear-deck geometry; this slim lip spoiler fits the Taycan J1 Sedan only.

Does the trim matter?
No. All Taycan J1 Sedan trims (Taycan, 4S, GTS, Turbo, Turbo S, Turbo GT) share the same trunk-lid geometry.

Does it interfere with the factory active rear wing?
No. It sits as a static slim lip at the trunk-lid rear edge and does not block the active wing deployment.

Will 3M VHB tape damage the trunk lid over time?
No. 3M VHB is automotive-approved and removable without paint damage.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof and weather-resistant.

Shipping time?
In-stock items ship within 1-3 business days. International shipping available.

Warranty?
BYC Performance offers a 12-month manufacturer warranty on this product.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes Porsche carbon parts, Audi RS carbon diffusers, BMW M carbon diffusers, Porsche 911 carbon spoilers, and many more high-quality carbon components. All parts undergo strict quality control.