Audi R8 Gen 1 (2006-2015) Prepreg Dry Carbon Fiber Spoiler

Engineered for Audi R8 Gen 1 (2006-2015) owners, this Prepreg Dry Carbon Fiber Spoiler adds a track-grade trunk-mounted statement to the mid-engine supercar silhouette. Manufactured in Europe to factory-spec tolerances and quality-controlled by BYC Performance, this Audi R8 Gen 1 carbon spoiler bolts directly to OEM trunk-lid mounting points - no cutting, no drilling, no modification.

If you want to exceed the factory plastic or body-colored spoiler in both look and finish, this autoclave-cured prepreg part is built for you. Engineered for Audi R8 Gen 1 trims - the 4.2 FSI V8 (420 hp), 5.2 FSI V10 (525 hp), and V10 Plus / R8 GT (550-560 hp) - this spoiler honors R8 LMS racing DNA and contributes to rear-axle stability at speed. Our catalog includes two trunk spoiler variants: this standard profile (aggressive winged) and a separate Slim Spoiler for owners who prefer a minimal lip-style trunk-edge extension.

Key Features

• Prepreg Dry Carbon Technology: Pre-impregnated carbon plies autoclave-cured under high heat and pressure for a more consistent weave.
• Lightweight and Strong: Noticeably lighter than the factory spoiler. No extra load on trunk hinges.
• Aerodynamic Benefit: Measurable rear-axle downforce at high speeds, inspired by R8 LMS race-car aerodynamics.
• 2x2 Twill Carbon Weave: Authentic carbon fiber pattern under high-gloss UV-protective clear coat.
• Direct OEM Fit: Plug & play on factory Audi R8 Gen 1 trunk-lid mounting points.
• UV & Chemical Protection: Long-life clear coat resists fading, cracking, and road grime.
• 3M Double-Sided Tape + Hardware: Dual fixation (adhesive + bolts) for vibration-free mounting.

Prepreg (Dry) Carbon vs. Wet Carbon - Which Is Better?

Most aftermarket carbon parts use wet lay-up, where resin is applied by hand and cured at room temperature - leaving weave and weight that vary part to part. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure - a more consistent weave
• A controlled resin ratio - lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fade over years of use

Vehicle Fitment

This Audi R8 Gen 1 carbon spoiler fits:

• Audi R8 Coupé Gen 1 (2006-2015) - V8 4.2 FSI (420 hp)
• Audi R8 Coupé Gen 1 (2006-2015) - V10 5.2 FSI (525 hp)
• Audi R8 V10 Plus Gen 1 (2013-2015) - V10 5.2 FSI (550 hp)
• Audi R8 GT Gen 1 (2011-2012, limited) - V10 5.2 FSI (560 hp)

Important notes:

• This spoiler is trunk-mounted and does NOT fit Audi R8 Spyder (convertible) - the soft-top has different rear deck geometry.
• NOT compatible with the next-generation Audi R8 Gen 2 (2015-2024) - completely different trunk geometry.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

Professional installation is recommended:

1. Clean the trunk-lid surface with IPA (isopropyl alcohol).
2. Dry-fit the spoiler using the supplied template.
3. Peel the 3M tape backing, position, and apply firm pressure for 30 seconds at each contact point.
4. If hardware holes are present, secure from the inside of the trunk lid (torque: 4-6 Nm).
5. Do not wash the vehicle for 24 hours to allow adhesive curing.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from the surface.

FAQ

Does this fit Audi R8 Gen 2 (2015+)?
No. Gen 1 and Gen 2 have different trunk and chassis geometry. Gen 2 V Spoiler / GT Spoiler are available separately.

Compatible with Audi R8 Spyder (convertible)?
No. This spoiler mounts to a fixed trunk lid, which the Spyder does not have.

Difference between R8 V8 4.2 and V10 5.2?
No fitment difference. This spoiler fits all Gen 1 trims (V8 4.2, V10 5.2, V10 Plus, R8 GT) - they share the same trunk-lid geometry.

Compatible with Lamborghini Huracán?
No. This part is for Audi R8 Gen 1 only.

Standard Spoiler vs. Slim Spoiler - what's the difference?
Standard Spoiler (this product) is an aggressive winged profile delivering visible downforce. Slim Spoiler is a minimal lip-style trunk-edge extension. Two separate catalog SKUs.

Will rain damage dry carbon?
No. Autoclave-cured prepreg carbon is fully waterproof and weather-resistant.

Shipping and warranty?
In-stock items ship within 1-3 business days. BYC Performance offers a 12-month warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers. Our catalog includes Audi R8 carbon parts, Audi RS carbon diffusers, BMW M3 carbon spoilers, Porsche carbon spoilers, and more. Every part undergoes strict quality control.