BMW M2 G87 | Prepreg Dry Carbon Fiber Vented Front Fender

BMW M2 G87 Prepreg Dry Carbon Fiber Vented Front Fender

Engineered for BMW M2 G87 owners chasing motorsport-grade weight reduction, this Prepreg Dry Carbon Fiber Vented Front Fender replaces the factory steel fenders; an integrated vent extracts hot air from the wheel well, lowering tire and brake temperatures. Imported from leading manufacturers around the world and quality-controlled by BYC Performance, this BMW M2 G87 carbon fender set bolts directly to OEM body mounting points.

This fender translates the wide-body aesthetic of the S58-powered 460 hp M2 G87 into pure track language. Noticeably lighter than the factory steel part, the resulting reduction in unsprung mass directly improves steering feel and cornering performance.

Key Features

• Integrated Vent: Releases high-pressure air from the upper wheel arch, reducing front-axle lift and brake temperatures.
• Prepreg Dry Carbon Technology: Autoclave cure delivers a more consistent weave and balanced resin distribution.
• Unsprung Weight Reduction: Noticeably lighter than the factory steel fender.
• OEM Indicator/Sensor Compatibility: Side turn signal and blind-spot sensor cutouts preserved.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under a high-gloss UV-protective clear coat.
• Direct OEM Fit: Mounts to factory bolt points (supplied as left + right pair).
• UV & Stone-Chip Protection: Long-life clear coat protects against fading and light impacts.

Prepreg Dry Carbon vs. Wet Carbon: Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature, leaving air voids and inconsistent weight. Prepreg dry carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Installation Notes

Installing the BMW M2 G87 carbon fenders requires removing the front bumper, headlights, and inner wheel liners; professional installation is mandatory:

1. Remove front bumper and headlights.
2. Detach inner wheel-arch liner and side turn signal.
3. Unbolt the OEM steel fender from upper, inner, and lower bolts.
4. Align the carbon fender and adjust door gap if needed.
5. Reinstall turn signal, sensors, and liner.
6. For added protection on the bare carbon surface, PPF (paint protection film) is recommended.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface.

FAQ

Does the vent actually work?
Yes. At speed it releases pressure from above the wheel arch, reducing front lift and lowering brake temperatures, a noticeable difference on track.

Does this fit the BMW M2 F87 (2016-2021)?
No. G87 and F87 use different fender geometry and track widths.

Is a painted version available?
Standard finish is natural carbon weave. A professional body shop can paint the fender if color-match is desired; carbon parts accept paint well.

Is it compatible with the S58-powered M2 G87?
Yes, fits all M2 G87 trims (standard, Competition, and the upcoming CS). Wide-track fenders for M3 G80 / M4 G82 are listed separately.

Shipping time?
In-stock items ship within 1-3 business days. International shipping available. Parts sourced to order are delivered within 30 days of the order date at the latest.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world and supplying them to the Turkish market. Our catalog includes BMW M2 carbon parts, BMW M3 carbon diffusers, Audi RS carbon hoods, Porsche carbon spoilers, and many more high-quality carbon components.