Lamborghini Urus (2018-2024) Prepreg Dry Carbon Fiber MSY Front Air Canard

Engineered for Lamborghini Urus owners, this Prepreg Dry Carbon Fiber MSY Front Air Canard set sits on the front bumper side corners as aggressive carbon winglets. Manufactured in Europe and quality-controlled by BYC Performance, this Lamborghini Urus carbon front canard set mounts to the OEM bumper side surface via 3M VHB tape — no drilling required.

If you're building a serious Lamborghini Urus tuning project and want a sharp carbon accent on the MSY front bumper or the OEM front bumper, this MSY front canard set is the right choice. Autoclave-cured prepreg carbon fiber is noticeably lighter than wet-lay parts, stronger, and UV-stable. The canards organize airflow over the front axle for modest aero benefit.

Key Features

• Prepreg Dry Carbon Technology: Autoclave-cured under high heat and pressure for a more consistent weave.
• MSY Canard Geometry: Aggressive accent on front bumper side corners.
• Aero Contribution: Directs airflow over the front axle for light downforce.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under a high-gloss UV-protective clear coat.
• 3M VHB Adhesive Mount: Drill-free, cut-free installation.
• UV & Chemical Protection: Clear coat resists fading and cracking.

Prepreg Dry Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon is made using wet lay-up with hand-applied resin cured at room temperature — leaving voids. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• a controlled resin ratio → lighter and stronger
• the production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Lamborghini Urus MSY carbon front canard set (pair, left + right) fits:

• Lamborghini Urus (2018, 2019, 2020, 2021, 2022) — pre-facelift front bumper
• Lamborghini Urus S (2022, 2023, 2024) — pre-facelift front bumper
• Lamborghini Urus Performante (2022, 2023, 2024) — pre-facelift front bumper
• Mounted on the MSY Front Bumper — coordinated set

Important notes:

• The Urus SE (2024+, PHEV) has a different front bumper geometry; these canards are NOT compatible with the SE OEM bumper.
• The Urus shares the MLBevo PL52 platform with Cayenne 9YA / Q8 / Bentayga but front bumper geometries differ.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

1. Clean the front bumper side surface with isopropyl alcohol.
2. Test-fit the canards and mark edge positions.
3. Remove the 3M VHB liner and press the parts onto the bumper.
4. Keep the vehicle dry for 24 hours for full adhesive cure.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle 30 cm from the surface.

FAQ

Can it be used on the OEM bumper?
Yes — fits pre-facelift Urus (2018-2024) OEM bumper side corners.

Compatible with the Urus SE?
No. The SE has different front bumper geometry.

Can it be combined with the MSY Front Bumper?
Yes — designed to coordinate with the MSY Front Bumper.

Compatible with Cayenne, Q8 or Bentayga?
No. MLBevo PL52 is shared but front bumper geometries differ.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. 1-2 day delivery across Turkey.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers. Our catalog includes Lamborghini carbon parts, Audi RS carbon diffusers, BMW M carbon spoilers, Porsche carbon parts, and Ferrari carbon parts.