Lamborghini Urus | Prepreg Dry Carbon Fiber MSY Front Lip

Lamborghini Urus (2018-2024) Prepreg Dry Carbon Fiber MSY Front Lip

Engineered for Lamborghini Urus owners, this Prepreg Dry Carbon Fiber MSY Front Lip sits on the front bumper lower edge as an aggressive carbon lip splitter. Imported from leading manufacturers around the world and quality-controlled by BYC Performance, this Lamborghini Urus carbon front lip mounts to the OEM bumper lower edge with 3M VHB tape and concealed hardware. It coordinates with the MSY Front Bumper as a complete front set.

If you're building a serious Lamborghini Urus tuning project and want to visually lower the front and sharpen the track look, this MSY front lip is the right choice. Autoclave-cured prepreg carbon fiber is noticeably lighter than wet-lay parts, stronger, and UV-stable. The clean splitter line suits the Urus's 4.0L V8 biturbo (Standard 650 hp, S/Performante 666 hp) character.

Key Features

• Prepreg Dry Carbon Technology: Autoclave-cured under high heat and pressure for a more consistent weave.
• MSY Splitter Profile: Aggressive lip line at the front bumper lower edge.
• Aero Contribution: Organizes underbody airflow, light downforce at high speed.
• Lightweight: Carbon offers very high strength for its weight.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under a high-gloss UV-protective clear coat.
• Bolt-On + 3M VHB Mount: Drill-free, cut-free installation on OEM bumper lower edge.
• UV & Chemical Protection: Clear coat resists fading, cracking, and stone chips.

Prepreg Dry Carbon vs. Wet Carbon: Which Is Better?

Most aftermarket carbon is made using wet lay-up with hand-applied resin cured at room temperature, leaving voids. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• a controlled resin ratio → lighter and stronger
• the production method widely chosen in motorsport
• Minimal UV fading over years of use

Installation Notes

1. Clean the front bumper lower edge with isopropyl alcohol.
2. Test-fit the lip and mark edge positions.
3. Remove the 3M VHB liner; reinforce with supplied concealed hardware to the manufacturer's recommended torque.
4. Keep the vehicle dry for 24 hours for full adhesive cure.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle 30 cm from the surface.

FAQ

Does this lip fit Urus Standard, S and Performante?
Yes. All pre-facelift Urus (2018-2024) trims share the same front bumper lower edge geometry.

Compatible with the Urus SE?
No. The SE front bumper geometry has changed.

Can it be combined with the MSY Front Bumper?
Yes. Designed to coordinate with the MSY Front Bumper.

Compatible with Cayenne, Q8 or Bentayga?
No. MLBevo PL52 is shared but front bumper curvatures differ.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. 1-2 day delivery across Turkey. Parts sourced to order are delivered within 30 days of the order date at the latest.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world. Our catalog includes Lamborghini carbon parts, Audi RS carbon diffusers, BMW M carbon spoilers, Porsche carbon parts, and Ferrari carbon parts.