Lamborghini Urus | Prepreg Dry Carbon Fiber MSY Hood

Lamborghini Urus (2018-2024) Prepreg Dry Carbon Fiber MSY Hood

Engineered for Lamborghini Urus owners, this Prepreg Dry Carbon Fiber MSY Hood lightens the front end of the super-SUV and brings race-grade aggression. Imported from leading manufacturers around the world and quality-controlled by BYC Performance, this Lamborghini Urus carbon hood bolts to OEM hinge and latch points and supports engine bay cooling via integrated power bulge and extraction vents.

If you're building a serious Lamborghini Urus tuning project and want a measurable front-end weight reduction plus motorsport-inspired styling, this MSY hood is what you need. Autoclave-cured prepreg carbon fiber is noticeably lighter than wet-lay carbon and significantly lighter than the aluminum OEM hood, reducing front axle weight to suit the Urus's 4.0L V8 biturbo (Standard 650 hp, S/Performante 666 hp) power character.

Key Features

• Prepreg Dry Carbon Technology: Autoclave-cured under high heat and pressure for a more consistent weave.
• MSY Design Line: Pronounced power bulge + symmetric extraction vents.
• Significant Weight Reduction: Notably lighter than the aluminum OEM hood; carbon offers very high strength for its weight.
• Engine Bay Cooling: Functional vents extract heat from the engine bay.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under a high-gloss UV-protective clear coat.
• Direct OEM Fit: Bolts to pre-facelift Lamborghini Urus (2018-2024) hinge and latch points.
• UV & Chemical Protection: Clear coat resists fading, cracking, and stone chips.

Prepreg Dry Carbon vs. Wet Carbon: Which Is Better?

Most aftermarket carbon parts use wet lay-up with hand-applied resin cured at room temperature, leaving voids. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• a controlled resin ratio → lighter and stronger
• the production method widely chosen in motorsport
• Minimal UV fading over years of use

Installation Notes

1. Support the spring-loaded hinges before removing the OEM hood (use 2 people).
2. Remove hinge bolts and washer / seals.
3. Set the new carbon hood on the hinges and test-fit for alignment.
4. Secure with supplied hardware to the manufacturer's recommended torque.
5. Verify the latch closes cleanly and the secondary catch engages.
6. Professional installation strongly recommended.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle 30 cm from the surface. Periodically clear vent channels with compressed air.

FAQ

Does this hood fit Urus Standard, S and Performante?
Yes. All pre-facelift Urus (2018-2024) trims share the same hood hinge and latch geometry.

Does this fit the Urus SE (2024+)?
No / verification required. The SE's hood vent stamping has changed; SE owners must verify with BYC before ordering.

Compatible with Cayenne, Q8 or Bentayga?
No. MLBevo PL52 is shared, but hood stampings are completely different.

Will OEM gas struts work with the lighter hood?
Yes, but the lighter carbon hood may cause the OEM struts to over-extend; lower-pressure compatible struts are recommended.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. 1-2 day delivery across Turkey. Hoods are oversized freight and arrive in 2-5 business days. Parts sourced to order are delivered within 30 days of the order date at the latest.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world. Our catalog includes Lamborghini carbon parts, Audi RS carbon diffusers, BMW M carbon spoilers, Porsche carbon parts, and Ferrari carbon parts.