Lamborghini Urus | Prepreg Dry Carbon Fiber MSY Spoiler v2

Lamborghini Urus (2018-2024) Prepreg Dry Carbon Fiber MSY Spoiler (High-Profile Variant, v2)

Engineered for Lamborghini Urus owners, this Prepreg Dry Carbon Fiber MSY Spoiler v2 adds an aggressive carbon wing profile that rises clearly above the OEM roof line. Imported from leading manufacturers around the world and quality-controlled by BYC Performance, this Lamborghini Urus carbon roof spoiler v2 mounts to the roof trailing edge with 3M VHB tape and concealed hardware. For the low-profile alternative, see MSY Spoiler v1.

If you're building a serious Lamborghini Urus tuning project and want a strong wing-style accent and clear track look, this MSY spoiler v2 is the right choice. Autoclave-cured prepreg carbon fiber is noticeably lighter than wet-lay parts, stronger, and UV-stable. The aggressive silhouette suits the Urus's 4.0L V8 biturbo (Standard 650 hp, S/Performante 666 hp) character.

Key Features

• Prepreg Dry Carbon Technology: Autoclave-cured under high heat and pressure for a more consistent weave.
• High-Profile MSY v2 Line: Aggressive wing silhouette rising above the OEM roof edge.
• Lightweight Strength: Carbon fiber offers very high strength for its weight.
• Aero Contribution: Greater height adds modest rear downforce at high speed.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under a high-gloss UV-protective clear coat.
• Bolt-On + 3M VHB Mount: Drill-free, cut-free installation on roof trailing edge points.
• UV & Chemical Protection: Clear coat resists fading and cracking.

Prepreg Dry Carbon vs. Wet Carbon: Which Is Better?

Most aftermarket carbon is made using wet lay-up with hand-applied resin cured at room temperature, leaving voids. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• a controlled resin ratio → lighter and stronger
• the production method widely chosen in motorsport
• Minimal UV fading over years of use

Installation Notes

1. Clean the roof trailing edge with isopropyl alcohol.
2. Test-fit the spoiler and mark edge positions.
3. Remove the 3M VHB liner; use concealed hardware if supplied, to the manufacturer's recommended torque.
4. Keep the vehicle dry for 24 hours for full adhesive cure.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle 30 cm from the surface.

FAQ

Does this spoiler fit Urus Standard, S and Performante?
Yes. All pre-facelift Urus (2018-2024) trims share the same roof trailing edge geometry.

Does this fit the Urus SE?
Generally yes. Roof trailing edge geometry is largely retained. SE owners should verify with BYC.

What's the difference between MSY Spoiler v1 and v2?
v2 (this product) is the higher-profile, more aggressive variant; v1 is low-profile, close to OEM.

Compatible with Cayenne, Q8 or Bentayga?
No. MLBevo PL52 is shared but roof trailing edges differ.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. 1-2 day delivery across Turkey. Parts sourced to order are delivered within 30 days of the order date at the latest.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world. Our catalog includes Lamborghini carbon parts, Audi RS carbon diffusers, BMW M carbon spoilers, Porsche carbon parts, and Ferrari carbon parts.