Porsche 911 (991 / 991.2) | Prepreg Dry Carbon Fiber Side Skirt V2

Porsche 911 (991 / 991.2, 2012-2019) Prepreg Dry Carbon Fiber Side Skirt V2 Aggressive

Engineered for Porsche 911 991 / 991.2 owners, this Prepreg (Dry) Carbon Fiber Side Skirt V2 is our second 991 side skirt design: a deeper, more aggressive, motorsport-inspired carbon rocker. Quality-controlled by BYC Performance, this Porsche 911 carbon side skirt v2 bolts directly to OEM mounting points. Compared to our OEM-style 991 side skirt, this V2 is noticeably deeper, more curved, and aero-focused.

The deeper rocker curve and extended lower edge channel wheel-arch airflow more aggressively toward the rear diffuser. The integrated edge blade underneath draws from 911 GT3 R / Cup race-car practice. The same rocker geometry is shared across all Carrera Coupé trims from the 991.1 Carrera 3.4L NA to the 991.2 GT3 4.0L NA 500 hp. For a cleaner street-oriented alternative see our first 991 side skirt variant.

Key Features

• Prepreg (Dry) Carbon Technology: Autoclave cure under high heat and pressure; a more consistent weave.
• Aggressive Deep Profile: Drops below the factory silhouette; GT3 Cup-inspired.
• Aero Edge Blade: Channels wheel-arch airflow to the rear diffuser.
• Direct OEM Fit: 1:1 with 991 / 991.2 rocker mounting points; clip and hardware kit included.
• 2x2 Twill Carbon Weave: Deep carbon pattern under a high-gloss UV-protective clear coat.
• Lightweight: Noticeably lighter than the OEM painted plastic rocker.
• Sold as a Pair: Left and right skirts shipped as a set.
• Variant Note: For a cleaner OEM-style alternative see the first 991 Side Skirt.

Prepreg (Dry) Carbon vs. Wet Carbon: Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, with hand-applied resin cured at room temperature. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Installation Notes

1. Remove the OEM rocker panel by detaching clips and bolts.
2. Test-fit the carbon skirt and confirm the deep curve aligns with the door line.
3. Use existing OEM clips plus the supplied hardware kit.
4. Torque bolts to the manufacturer's recommended torque.
5. Professional installation recommended.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. The deep lower edge collects road grime: monthly cleaning recommended.

FAQ

Does this fit the 992 (2020+)?
No. 992-generation rocker geometry is different.

Does this fit the 997?
No. The 997 is the previous generation.

How is this different from the other 991 side skirt?
This V2 variant is the aggressive design with a deeper curve below the factory silhouette and an aero edge blade. For a cleaner OEM-style alternative see the first 991 Side Skirt.

Compatible with Turbo / Turbo S?
Turbo wide-body rocker width may differ; confirm trim before ordering.

Compatible with Cabriolet and Targa?
Geometrically compatible, but the aggressive profile pairs best with Coupé silhouette.

Sold as a set?
Yes. Left and right skirts ship as a pair.

Shipping time?
In-stock items ship in 1-3 business days. Delivered via partner couriers due to length. Parts sourced to order are delivered within 30 days of the order date at the latest.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world. Our catalog includes Porsche 911 carbon parts, Porsche 718 carbon diffusers, BMW M carbon components, Audi RS carbon spoilers, and more.