Porsche 911 991 / 991.2 Prepreg Dry Carbon Fiber TA Body Kit

Engineered as a complete aero package for Porsche 911 991/991.2 Coupé owners, this Prepreg (Dry) Carbon Fiber TA Body Kit transforms the front bumper, side skirts and rear bumper of your 911 with race-grade aggression. Manufactured in Europe to factory-spec tolerances and quality-controlled by BYC Performance, this Porsche 911 TA carbon body kit mounts directly to OEM chassis points.

The 911 is a rear-engine flat-6 sports car icon — the 991.1 (Carrera 350-430 hp / Turbo S 560 hp / GT3 475 hp) and 991.2 (Carrera 370-450 hp / Turbo S 580 hp / GT3 500 hp / GT2 RS 700 hp) generations cover the full performance spectrum. This TA Body Kit delivers a coherent aero and visual transformation for 991/991.2 Coupé owners. Autoclave-cured prepreg carbon is noticeably lighter than OEM plastic bumper shells.

Key Features

• Prepreg (Dry) Carbon Technology: Autoclave-cured under high heat and pressure — a more consistent weave.
• Coherent TA Aero Package: Front bumper, side skirts and rear bumper designed together for a unified line.
• Lightweight: Noticeably lighter than OEM plastic bumper shells.
• Race-Grade Strength: Carbon fiber offers very high strength for its weight.
• Aerodynamic Gains: Optimized front splitter and rear diffuser geometry add high-speed stability.
• 2x2 Twill Carbon Weave: Authentic pattern under a high-gloss UV-protective clear coat.
• OEM-Compatible Mounting: Direct fit to factory chassis/bumper attachment points, no cutting required.

Prepreg (Dry) Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Porsche 911 TA carbon body kit fits the following models:

• Porsche 911 991.1 Carrera / Carrera S / 4 / 4S Coupé (2012-2016)
• Porsche 911 991.1 Carrera GTS Coupé (2014-2016)
• Porsche 911 991.1 Turbo / Turbo S Coupé (2013-2016)
• Porsche 911 991.2 Carrera / S / 4 / 4S / GTS Coupé (2016-2019)
• Porsche 911 991.2 Turbo / Turbo S Coupé (2016-2019)

Important notes:

• This body kit is designed for 991/991.2 Coupé only. Cabriolet and Targa have different rear geometry — full kit fitment is not guaranteed.
• GT3, GT3 RS and GT2 RS already come with wide factory aero packages; this kit targets standard Carrera/Turbo bumper geometry — GT trim owners should confirm fitment before ordering.
• NOT compatible with Porsche 911 992 (2020+).
• NOT compatible with Porsche 911 997 (2005-2012).

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

Body kit installation is comprehensive — professional installation is strongly recommended.

1. Raise the vehicle and remove the front bumper (disconnect headlight and washer hoses).
2. Remove side skirt mounting bolts.
3. Detach the rear bumper from behind the exhaust.
4. Dry-fit the new carbon panels and verify alignment.
5. Secure with 3M VHB tape + supplied hardware to the manufacturer's recommended torque.
6. Adjust panel gaps and verify headlight alignment.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon sealant every 6 months. Keep pressure washer at least 30 cm from surface. Periodically inspect splitter and skirt undersides for road debris.

FAQ

Does this body kit fit the Porsche 911 992?
No. The 992 (2020+) has completely different bumper and panel geometry.

Does this fit the Porsche 911 997?
No. The 997 (2005-2012) is the previous generation.

Compatible with Cabriolet or Targa?
No. This body kit is designed for 991/991.2 Coupé only.

I own a GT3, GT3 RS, or GT2 RS — is it compatible?
GT trims come with wide factory aero; this kit targets standard Carrera/Turbo bumper geometry. Please confirm fitment with BYC Performance before ordering.

What's included in the kit?
Typical TA body kit contents: front bumper (with splitter), side skirts, rear bumper (with diffuser). Scope may vary per SKU — please confirm before ordering.

Any other TA parts in your catalog?
Yes — two distinct TA Spoiler variants and complementary TA pieces are available.

Shipping time?
In-stock items ship within 1-3 business days. The body kit may be split across multiple oversized packages.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes Porsche 911 carbon parts, Porsche carbon spoilers, Audi RS carbon diffusers, BMW M3 carbon hoods, and many more high-quality carbon components.