Porsche Panamera 971 (2017+) Prepreg Dry Carbon Fiber Mirror Cap

Engineered for Porsche Panamera 971 (G2, 2017+) owners, this Prepreg Dry Carbon Fiber Mirror Cap set adds an instantly noticeable motorsport-inspired detail to the side profile of your luxury GT sedan. Manufactured in Europe and quality-controlled by BYC Performance, this Porsche Panamera carbon mirror cap clips directly onto the factory mirror housing — no cutting, no drilling, no painting required.

If you are building a Porsche Panamera tuning project and want to convert factory painted or chrome mirror caps into a track-grade detail, this dry carbon mirror cap set is built for you. Autoclave-cured prepreg carbon fiber is noticeably lighter than wet-lay carbon parts, offers very high strength for its weight, and resists long-term UV fading. A subtle but unmistakable accent that complements the 971's drivetrain range — 2.9L V6 biturbo, 4.0L V8 biturbo, and Turbo S E-Hybrid (700 hp combined).

Key Features

• Prepreg (Dry) Carbon Technology: Pre-impregnated carbon plies cured in an autoclave under high heat and pressure for a more consistent weave and balanced resin distribution.
• Left + Right Pair: Shipped as a driver-side and passenger-side symmetrical pair.
• OEM Clip Fit: Snaps directly onto factory mirror housing clips — no adhesive, no screws, no cutting.
• 2x2 Twill Carbon Weave: Authentic carbon fiber pattern under a high-gloss UV-protective clear coat.
• Weight: Offers a worthwhile weight saving over the painted plastic OEM mirror cap.
• UV & Chemical Protection: Long-life clear coat protects against fading, cracking, bug spatter, and road tar.
• Direct OEM Fit: Compatible with both Panamera 971 Sedan and Sport Turismo wagon since they share the same mirror housing.

Prepreg (Dry) Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger for its weight
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Porsche Panamera 971 carbon mirror cap fits the following models:

• Porsche Panamera 971 Sedan (2017-2024) — all trims
• Porsche Panamera Sport Turismo 971 (2018-2024) — all trims
• Porsche Panamera 4 / 4S / GTS / Turbo / Turbo S 971
• Porsche Panamera Turbo S E-Hybrid 971 (700 hp combined)
• Porsche Panamera 4 E-Hybrid / 4S E-Hybrid 971
• Compatible with both pre-facelift (2017-2020) and post-facelift (2021+) models

Important notes:

• This product is NOT compatible with the previous-generation Porsche Panamera 970 (2009-2016). The 970 mirror housing has a different clip layout.
• The interior of the cap leaves clearance for Side Assist (blind spot) sensor radar/light.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Set Contents: 2 pieces (left + right)
• Origin: Europe

Installation Notes

Installing the Porsche Panamera carbon mirror cap takes only a few minutes. Professional installation is recommended but DIY is feasible:

1. Open the mirror housing slightly outward.
2. Carefully release OEM mirror cap clips with a plastic trim tool.
3. Remove the original cap.
4. Press the new carbon cap into place until all clips engage.
5. Verify all internal clips are fully seated.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface.

FAQ

Does this fit the Porsche Panamera 970 (2009-2016)?
No. The 970 mirror housing uses a different clip layout and this cap will not fit.

Compatible with Sport Turismo (wagon)?
Yes. The Panamera 971 Sedan and Sport Turismo share the same mirror housing.

Does it work with Side Assist (blind spot) sensors?
Yes. The cap interior leaves clearance for the sensor radar/light.

Difference between pre-facelift and post-facelift Panamera 971?
No. The 2020 facelift did not change the mirror housing; both periods are compatible.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof and weather-resistant.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. International shipping available.

Warranty?
BYC Performance offers a 12-month manufacturer warranty on this product.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes Porsche carbon parts, Audi RS carbon diffusers, BMW M carbon diffusers, Porsche 911 carbon spoilers, and many more high-quality carbon components. All parts undergo strict quality control.