Audi R8 Gen 1 (2006-2015) Prepreg Dry Carbon Fiber Mirror Cap

Engineered for Audi R8 Gen 1 (2006-2015) owners, this Prepreg Dry Carbon Fiber Mirror Cap set adds a track-grade carbon touch to one of the R8's most visible details. Manufactured in Europe to factory-spec tolerances and quality-controlled by BYC Performance, this Audi R8 carbon mirror cap bolts directly to the OEM mirror housing - no cutting, no drilling, no modification. Supplied as a left + right pair.

This product is for the first-generation (Gen 1, 2006-2015) Audi R8. Verify your model year and generation before ordering; the second-generation (Gen 2, 2015 onward) R8 uses a different mirror housing geometry and these caps will NOT fit Gen 2 cars.

Key Features

• Prepreg Dry Carbon Technology: Pre-impregnated carbon plies autoclave-cured under high heat and pressure for a more consistent weave.
• Left + Right Set: Driver and passenger sides included.
• Direct-Fit Design: Replaces the OEM R8 mirror cap; clip-on system.
• Lightweight Construction: Noticeably lighter than the factory mirror cap.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under high-gloss UV-protective clear coat.
• Direct OEM Fit: Plug & play on Audi R8 Gen 1 (2006-2015) mirror housings.
• UV & Chemical Protection: Long-life clear coat resists fading, cracking, stone chips, and road grime.

Prepreg (Dry) Carbon vs. Wet Carbon - Which Is Better?

Most aftermarket carbon parts use wet lay-up, where resin is applied by hand and cured at room temperature - leaving weave and weight that vary part to part. Prepreg (dry) carbon:

• Cured in autoclave under high heat and pressure - a more consistent weave
• A controlled resin ratio - lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fade over years of use

Vehicle Fitment

This Audi R8 carbon mirror cap set fits the following first-generation (Gen 1, 2006-2015) models:

• Audi R8 Coupé Gen 1 (2006-2015) - V8 4.2 FSI
• Audi R8 Coupé Gen 1 (2006-2015) - V10 5.2 FSI
• Audi R8 V10 Plus Gen 1 (2006-2015) - V10 5.2 FSI
• Audi R8 Spyder Gen 1 (2006-2015) - V8 4.2 FSI and V10 5.2 FSI

Important notes:

• DOES NOT FIT - Audi R8 Gen 2 (2015-2024): Gen 2 side mirror is a completely different one-piece design.
• DOES NOT FIT - Lamborghini Huracán: Different mirror geometry.
• Turn signal lamp: The OEM mirror turn signal can be transferred to the carbon cap; professional installation recommended.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe
• Set Contents: 2 pieces (left + right)

Installation Notes

Professional installation is recommended:

1. Turn the vehicle off and allow mirror heating to cool.
2. Carefully lift the OEM mirror cap from the lower clip points with a plastic trim tool.
3. If equipped with turn signal, gently disconnect the lamp connector.
4. Seat the carbon cap in place and verify all clips are fully engaged.
5. Reconnect the turn signal connector (if applicable).
6. Repeat on the opposite side.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from the surface.

FAQ

Which Audi R8 generation does this fit?
These carbon caps fit the first-generation (Gen 1, 2006-2015) Audi R8. Coupé, V10 Plus, and Spyder share the same mirror geometry across Gen 1. If unsure about your car's generation, share your VIN with an Audi dealer or with us.

How do I verify my generation?
If unsure, share your VIN with an Audi dealer or with us and we'll confirm the correct generation together.

Does this fit Audi R8 Gen 2 (2015+)?
No. Gen 2 side mirror is a completely different design.

Compatible with Audi R8 Spyder (convertible)?
Yes - on the first-generation (Gen 1, 2006-2015) R8 Spyder. Mirror geometry is shared between Coupé and Spyder within the first generation.

Is turn signal transfer required?
Yes - the OEM mirror turn signal transfers to the carbon cap. Professional installation recommended.

Compatible with Lamborghini Huracán?
No.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof and weather-resistant.

Shipping and warranty?
In-stock items ship within 1-3 business days. BYC Performance offers a 12-month warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers. Our catalog includes Audi R8 carbon parts, Audi RS carbon diffusers, BMW M3 carbon mirror caps, Porsche carbon mirror caps, and more. Every part undergoes strict quality control.