Audi R8 Gen 2 (2015-2024) | Prepreg Dry Carbon Fiber V Spoiler

Audi R8 Gen 2 (2015-2024) Prepreg Dry Carbon Fiber V Spoiler

Engineered for Audi R8 Gen 2 (2015-2024) owners, this Prepreg Dry Carbon Fiber V Spoiler adds a clean, aggressive lip-profile finish to the trunk line. Its low-profile V geometry creates a more minimal yet striking accent compared to the GT Spoiler. Made to factory tolerances by leading manufacturers around the world and quality-controlled by BYC Performance, this Audi R8 carbon spoiler bonds directly to the OEM trunk surface, no cutting, no drilling, no modification required.

If you're building a serious Audi R8 tuning project and want a part that exceeds the factory trunk line and adds real aerodynamic value, this dry carbon V Spoiler is the answer. Autoclave-cured under high heat and pressure, prepreg carbon fiber delivers a noticeably lighter and stronger structure than wet-lay parts. Tuned to match the LMS racing DNA of the Gen 2 R8's 5.2L V10 FSI naturally-aspirated engine (V10 540 hp / V10 Plus 610 hp / V10 Performance 570-612 hp / R8 GT RWD 620 hp), the V geometry is a visual and functional upgrade for track and street alike.

Key Features

• Prepreg Dry Carbon Technology: Pre-impregnated carbon plies autoclave-cured under high heat and pressure for a more consistent weave.
• Low-Profile V Geometry: Lower and more subtle than the GT Spoiler; adds aggression without breaking the original R8 silhouette.
• Aerodynamic Performance: Increases rear-axle grip at high speed and cleans airflow over the rear bumper top edge.
• Significant Weight Savings: Noticeably lighter than the OEM plastic trunk spoiler.
• 2x2 Twill Carbon Weave: Authentic carbon fiber pattern under a high-gloss UV-protective clear coat.
• Direct OEM Fit: Plug & play on factory Audi R8 Gen 2 (2015-2024) trunk surface using pre-applied 3M VHB tape.
• UV & Chemical Protection: Long-life clear coat protects against fading, cracking, fuel splash, and road tar.

Prepreg (Dry) Carbon vs. Wet Carbon: Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is hand-applied and room-temperature cured, leaving weave and weight that vary part to part. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Installation Notes

Installing the Audi R8 V Spoiler is an adhesive-mounted process on the trunk top edge. Professional installation is recommended:

1. Clean the trunk top edge with isopropyl alcohol and dry.
2. Mark the bonding line using a template (center-line reference).
3. Test-fit the spoiler for left/right alignment.
4. Peel the VHB protective liner and press firmly for full bond.
5. Avoid washing or pressure-washing for the first 48 hours.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface.

FAQ

Does this fit both pre- and post-facelift R8?
Yes. The V Spoiler mounts on the trunk lid; trunk geometry did not change with the 2019 facelift, so it is cross-fit for pre- and post-facelift Gen 2.

Is the V Spoiler the same as the GT Spoiler?
No. The V Spoiler is a lower lip-style design; the GT Spoiler is a taller, more aggressive R8 GT-inspired profile. Choose based on visual preference.

Compatible with the Audi R8 Spyder (Convertible)?
No. The V Spoiler is for Coupé only, since the Spyder's folding rear deck geometry differs.

Compatible with Gen 1?
No. Gen 1 has completely different trunk size and geometry.

Compatible with the Lamborghini Huracán?
No. Despite shared platform, the Huracán has different trunk and rear-end geometry.

Is the adhesive strong enough?
Yes. The pre-applied 3M VHB industrial double-sided tape is automotive OEM grade; with proper surface prep it holds for years.

Shipping time?
In-stock items ship within 1-3 business days. Parts sourced to order are delivered within 30 days of the order date at the latest.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world. Our catalog includes Audi R8 carbon parts, Audi RS carbon diffusers, BMW M3 carbon diffusers, Porsche carbon spoilers, and many more high-quality components. Every part undergoes strict quality control.