Audi RS3 8V (2015-2020) Prepreg Dry Carbon Fiber Front Bumper Canard

Designed specifically for Audi RS3 8V owners, this Prepreg (Dry) Carbon Fiber Front Bumper Canard set adds race-inspired aggression to RS3's wide front fascia while generating front-axle downforce at speed. Manufactured in Europe to factory-spec tolerances and quality-controlled by BYC Performance, this Audi RS3 carbon canard set mounts directly to the RS3 OEM front bumper without disturbing structural integrity.

RS3 8V's legendary 2.5 TFSI EA855 evo five-cylinder inline turbo engine (Sportback 367 hp, Sedan 400 hp) has high cooling demands; these canards channel clean airflow around the front fascia and visually reinforce the aggressive identity of Audi's unique five-cylinder DNA. Autoclave-cured prepreg carbon is noticeably lighter than wet lay-up and offers a far longer service life.

Key Features

• Prepreg (Dry) Carbon Technology: Carbon plies cured in an autoclave under high heat and pressure.
• Race-Inspired Canard Profile: DTM- and LMS-derived profile generates downforce on the front axle.
• RS3-Specific Fit: Designed for RS3 8V's wide front bumper air intakes and fascia geometry.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under a high-gloss UV-protective clear coat.
• 3M VHB Tape Mount: Automotive-grade adhesive reduces the need for visible hardware.
• UV Protection: Long-life clear coat resists fading and cracking.
• Supplied as a Set: Left and right canards ship as a symmetric pair.

Prepreg (Dry) Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are produced using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Audi RS3 8V carbon front canard set is compatible only with the following models:

• Audi RS3 8V Sportback (2015-2017) — 2.5 TFSI EA855 evo five-cylinder, 367 hp, Quattro
• Audi RS3 8V Sportback Facelift (2017-2020) — 2.5 TFSI EA855 evo, 400 hp
• Audi RS3 8V Sedan (2017-2020) — 2.5 TFSI EA855 evo, 400 hp, Quattro

Important notes:

• This product is NOT compatible with S3 8V or A3 8V. The RS3 front bumper has wider air intakes and different geometry.
• This product is NOT compatible with the RS3 8Y (2020+) next-generation chassis.
• This product is NOT compatible with the previous-generation RS3 8P (2011-2012).

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss UV-Protective Clear Resin
• Color: Natural carbon weave black
• Quantity: 2 pieces (symmetric left + right set)
• Origin: Europe

Installation Notes

Installing the Audi RS3 carbon canard set is a relatively simple accessory installation. Professional installation is recommended:

1. Thoroughly clean and dry the bumper surface with isopropyl alcohol.
2. Test-fit the canards along the RS3 front bumper intake edge and mark the position.
3. Remove the 3M VHB tape backing; apply to the bumper at around 25°C ambient.
4. Apply even pressure for 10-15 seconds.
5. Do not wash the vehicle for 24 hours; avoid high-pressure washing for 48 hours to allow the adhesive to cure.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from the canard edges.

FAQ

Does this fit the S3 or A3 8V?
No. This product is RS3 8V-specific. The RS3 front bumper has wider air intakes than S3/A3.

Does it fit both RS3 Sportback and RS3 Sedan?
Yes. Compatible with 2015-2017 Sportback (367 hp), 2017-2020 facelift Sportback, and 2017-2020 RS3 Sedan (400 hp).

Does it fit the RS3 8Y (2020+)?
No. 8Y is the next-generation chassis with different front bumper geometry.

Does it really hold with just tape?
3M VHB is automotive-grade adhesive used by OEMs for accessory parts. Optional fasteners can be added underneath if desired.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof and weather-resistant.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. 1-2 day delivery across Turkey.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes Audi RS3 carbon parts, Audi RS carbon diffusers, BMW M3 carbon canards, Porsche carbon components, and many more high-quality carbon parts. Every part we source undergoes strict quality control.