Audi S3/A3/RS3 8V (2012-2020) Prepreg Dry Carbon Fiber Vented Front Fender

Engineered for Audi S3 8V, A3 8V and RS3 8V (2012-2020) owners, this Prepreg (Dry) Carbon Fiber Vented Front Fender set adds motorsport-inspired aggression to the front wheel arches while releasing high-pressure air built up behind the wheel — supporting aerodynamic efficiency and brake cooling. Manufactured in Europe to factory-spec tolerances and quality-controlled by BYC Performance, this Audi 8V carbon vented fender set bolts directly to OEM fender mounting points.

In race cars, fender venting reduces wheel-well pressure, contributes to front-axle downforce, and improves aerodynamic stability; on street cars, it adds both visual aggression and front brake rotor ventilation. This fender is especially meaningful around the front axle of RS3 8V's 2.5 TFSI EA855 evo five-cylinder engine (367-400 hp), where front brake rotors are subject to high thermal loads in aggressive driving. It also delivers visual and functional upgrades for S3 8V's 2.0 TFSI EA888 (286-310 hp) and A3 8V's 1.4/2.0 TFSI/TDI engines. Supplied as a left + right symmetric pair.

Key Features

• Prepreg (Dry) Carbon Technology: Carbon plies cured in an autoclave under high heat and pressure for a more consistent weave.
• Vent Design: Releases wheel-well pressure to support front-axle aerodynamics and brake rotor cooling.
• Lightweight: Noticeably lighter than factory steel fenders; sharpens reflexes by reducing weight at the front axle.
• High Strength: Carbon fiber offers very high strength for its weight.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under a high-gloss UV-protective clear coat.
• Direct OEM Fit: Mates with S3/A3/RS3 8V fender mounting points and side marker/mirror cutouts.
• UV & Environmental Protection: Long-life clear coat resists UV fading, road salt, and stone chips.
• Supplied as a Set: Left and right fenders ship as a symmetric pair.

Prepreg (Dry) Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are produced using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Audi 8V carbon vented front fender is compatible with the following models:

• Audi A3 8V Sportback (2012-2020) — 1.4/2.0 TFSI EA888/EA211, 1.6/2.0 TDI
• Audi A3 8V Sedan (2013-2020)
• Audi A3 8V Cabriolet (2014-2020)
• Audi S3 8V Sportback and Sedan (2013-2020) — 2.0 TFSI EA888, 286 hp (pre-facelift) / 310 hp (facelift)
• Audi RS3 8V Sportback (2015-2017) — 2.5 TFSI EA855 evo five-cylinder, 367 hp
• Audi RS3 8V Sedan (2017-2020) — 2.5 TFSI EA855 evo five-cylinder, 400 hp

Important notes:

• Front fender chassis geometry is shared across all S3/A3/RS3 8V trims, so this vented fender set fits the entire family.
• This product is NOT compatible with the Audi A3 8Y (2020+) next-generation chassis.
• This product is NOT compatible with the previous-generation Audi A3 8P (2003-2012).
• Side marker and mirror signal cutouts match OEM exactly.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss UV-Protective Clear Resin
• Color: Natural carbon weave black
• Quantity: 2 pieces (symmetric left + right set)
• Origin: Europe

Installation Notes

Installing the Audi 8V carbon fender set is a direct replacement of the OEM fenders. Professional installation is recommended:

1. Raise the vehicle; remove the wheel; remove the fender liner.
2. Remove upper and lower fender bolts; disconnect the side marker harness.
3. Carefully remove the OEM fender.
4. Align the carbon fender; hand-tighten with supplied fasteners.
5. Adjust the door, hood, and bumper gaps; final-torque to the manufacturer's recommended torque.
6. Reinstall the side marker and fender liner.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from the surface. Avoid spraying directly into the vent channels at close range.

FAQ

Does it fit the RS3 8V?
Yes. Front fender chassis geometry is shared across the S3/A3/RS3 8V family; compatible with both RS3 Sportback and RS3 Sedan.

Does it fit Sportback, Sedan, and Cabriolet?
Yes. All 8V body styles share the same front fender mounting points.

Does it fit the Audi 8Y (2020+)?
No. 8Y is the next-generation chassis with different fender geometry.

Are the vents functional?
Yes. The vents release wheel-well pressure and aid front brake rotor heat transfer.

Any difference between pre-facelift and facelift?
No. 2013-2016 and 2017-2020 models share the same fender mounting geometry.

Is it sold as a set?
Yes. Left and right fenders ship as a symmetric pair.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. 1-2 day delivery across Turkey.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes Audi RS3 carbon fenders, Audi RS carbon parts, BMW M3 carbon fenders, Porsche carbon components, and many more high-quality carbon parts. Every part we source undergoes strict quality control.